All Installation Instructions for Whirlpool Microwave GH7208XRS5

Noisy turntable motor

Unplug microwave. Remove turntable and support from inside. Remove outside bottom cover (10 screws). Remove 2 torx screws holding motor in place. Remove 2 wires from motor, noting colors. Wires are held with spade connectors that has a small tab that needs to be depressed. Remove washer from motor and place on new motor. Entire procedure very easy.

Parts Used:

Turn Motor

Bruce from Rock Island, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

glass plate broken, turntable driver melter

replaced the above and t. ring, spacer and motor. from underneath the microwave, two screws lets motore drop down, then detach two wires from terminals on moter (be sure to unplug the microwave first) and from insdie the microwave the driver pulls up off the motor shaft easily.

Parts Used:

Turn Motor

Turntable Ring

Turntable Driver

Glass Cooking Tray

Mike from Mukilteo, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

My girlfriend's microwave did not spin anything and didn't cook very well

I opened the door, inserted the part, and automatically became her hero! She even began to sing Bette Midler's Wind Beneath My Wings: "Did you ever know that you're my hero..."

Parts Used:

Turntable Driver

Dean from Lakewood, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken door handle

Remove top and botto screws, then use a butter knife to pull apart the door and remove the handle screws. Replace new handle ,make sure the little plastic ring inside screws are properly place in order to be able to screw the new handle back. And there,you have your new fixed appliance!! Easy cheese! ??

Parts Used:

Door Handle

Biviana from Sunrise, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

surface light on microwave wasnt' working

took the light assembly off and replaced the bulb and put the assembly together and fitted back in the space and finished the assembly.

Parts Used:

Surface Light Bulb

Dotty from Hillsboro, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

I broke the glass turn table tray in my microwave

There was no installation involved. I just placed the new tray in my microwave. What is amazing however, is I ordered my part early one morning, the tray arrived at my door step the next day.I paid for regular shipping. Thanks guys good work

Parts Used:

Glass Cooking Tray

JoEllen from Salinas, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Light burned

Unscrewed the lens cover anbd inserted the new bulb. Put the cover back on and there was light!

Parts Used:

Surface Light Bulb

Jennifer from Red Oak, IA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Light Burned Out

Followed the instruction booklet that came with the microwave. Very easy.

Parts Used:

Surface Light Bulb

Patti from Coarsegold, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Broken glass turntable

The glass turntable from PartSelect.com arrived quickly, on the estimated arrival day, and we were back in business. Thanks

Parts Used:

Glass Cooking Tray

Mike from Candler, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

turntable broke, spring was missing, filters needed changing

it was a breeze, the parts arrived in great condition and all was self explanatory, No directions or tools needed - filters replaced, turntable placed back in microwave and spring replaced.

Parts Used: