This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches...
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a bro...
This lower spray arm assembly in your dishwasher distributes water and detergent during the washing cycle by spinning around and spraying water in different directions. You can usually find it attache...
This mounting bracket is manufactured to secure your dishwasher to your countertop. Mounting brackets should be installed so the dishwasher doesn’t tip forward. You can fit the bracket to either the c...
This is a washer inlet valve assembly for your dishwasher. This valve allows water to flow into your dishwasher at the proper rate. If your dishwasher tub is not filling with water or filling when the...
This drain pump kit is for dishwashers. The drain pump kit removes the water from the dishwasher tub during the drain phase of the dishwashing cycle. The kit may include multiple parts; refer to your ...
This is the user interface control board for various dishwashers. The user interface panel is what you directly interact with on your dishwasher to start and stop it and select the specific cycle you ...
The detergent dispenser in your dishwasher stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end...
This OEM mid spray or center wash arm assembly distributes water and detergent in your dishwasher during the wash cycle. It has small nozzles that spray water onto your dishes and is located between t...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
12 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allan
July 29, 2021
The Green cycle finished light on control panel does not light.
For model number GDT655SSJ2SS
Hello Allan, Thank you for the question. The appliance may need a hard reset. You can press and hold the Cancel Button for two mins and then turn power off to the appliance for 5 mins. Plug the appliance back in and the appliance should be reset. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
February 3, 2020
No power on control switches. Before it went out, control switches would light up and beep occasionally whether door was shut or not. Would replacing door latch and strike remedy problem?
For model number GDT655SSJ2SS
Hello and thank you for writing.
A faulty door latch PS6447681 most certainly could cause this problem, you should check it with a multimeter and replace if faulty. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Phil
November 21, 2022
Unit powers on sometimes ~ when I unplug it for a couple of days & plug it back in, it will start working
For model number GDT655SSJ2SS
Hi Phil, thank you for your inquiry. We recommend checking to ensure that the appliance is properly plugged into its wall outlet, checking the control lock, and resetting the dishwasher. If it does not fix your issue, you need to inspect the following parts: the door latch, part number PS6447681, and the control board, part number PS12730509. If you require assistance to place an order, please contact customer service. We hope that helps!
verified power to dishwasher. Hardwired to unit. No lights light up on select cycle or start buttons. Cannot access error mode by pressing cycle select and start simultaneously
For model number GDT655SSJ2SS
Hi Dennis, thank you for contacting us. We have concluded that the issue is with the user interface board, part number PS16762500, as it is most likely faulty and may need to be replaced. We hope this is helpful!
I am looking for the lower door gasket part number.
For model number GDT655SSJ2SS
Hello Jack, thank you for reaching out. The bottom door gasket you are looking for does not come separately, and it comes as a part of the inner door assembly, part number PS16729226. We hope this helps.
Didn't actually do the compete repair but got close. Pulled out dishwasher, disconnected and checked continuity on the existing heating element (about 16 ohms) the new element was also about 16 ohms. This indicates they both were working fine and no need for replacement. Next step would have been to swap the elements would have been
... Read moresimple. Tried to replace main board as well, still not the issue so giving up and replacing the dishwasher. It wasn't the high temp cut off thermostat either incidentally and no error codes in maintenance mode. Check continuity of your existing element before ordering to save aggravation.
Open the washer, remove the bottom dish rack, then twist off the bottom water sprayer. Use a screwdriver to remove the mounting/ stabilizing screws so you can slide out the dishwasher. Close the dishwasher and slide it out. Underneath at the back there are two wires powering the drying element, carefully remove them. Use an adjustable wre
... Read morench to remove the two plastic mounting nuts for the drying element. Open the washer and remove the old drying element, and insert the new element. Reassemble the dishwasher in the reverse order if disassembly.
1. Turn off breaker supplying power to dishwasher in electrical panel 2. Open dishwasher door 3. Unscrew the screws that secure the dishwasher to the counter. 4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch. 5.
... Read more On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside. 6. Remove old door latch. 7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in. 8. Plug wire harness into new door latch. 9. Re-align dishwasher and re-secure to counter in previous position. 10. Test latch to make sure it closes properly. 11. Turn on breaker in electrical panel. The dishwasher should now function properly.