Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
GDF630PSM0SS General Electric Dishwasher - Overview
Save your modelModel Saved!
Save your model for later to make things easier.
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This lower rack roller is a genuine replacement component designed to support the smooth and stable movement of the dishwasher’s bottom rack. Measuring approximately 1.5 inches in diameter and finishe...
This part is a replacement gasket for your dishwasher. The gasket creates a seal at the bottom of the dishwasher tub, so water does not leak out while the dishwasher is running. If you notice water le...
This dishwasher door latch is designed to secure the door during operation by connecting to the door strike and ensuring a tight seal. Mounted to the tub frame, it plays a critical role in enabling th...
The tub gasket, also known as the door gasket runs along the perimeter of your dishwasher basin and creates a seal that prevents water from leaking out when the tub is full. If you notice water on the...
This is an authentic lower dishrack with wheels. Please note that the manufacturer has made a design change, which requires the silverware basket to be relocated from the door to the inside of the rac...
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146
Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers w...
This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuou...
This is a washer inlet valve assembly for your dishwasher. This valve allows water to flow into your dishwasher at the proper rate. If your dishwasher tub is not filling with water or filling when the...
This mounting bracket is manufactured to secure your dishwasher to your countertop. Mounting brackets should be installed so the dishwasher doesn’t tip forward. You can fit the bracket to either the c...
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
This detergent dispenser is designed for use in dishwashers and serves as a secure compartment for holding and releasing detergent during the wash cycle. The dispenser opens at the appropriate time to...
$48.43
In Stock
Order now and your part arrives by Apr 23
Questions And Answers for GDF630PSM0SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jenny
November 4, 2022
Do you carry the control board for this model?
For model number GDF630PSM0SS
Hello Jenny, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS12741264. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Dishwasher will not start - is there reset button ??
For model number GDF630PSM0SS
Hi Barry, thank you for reaching out. According to our research, your model does not have a reset button. You need to unplug the unit to cut the power. Turn off the unit’s power from your home’s circuit breaker or fuse box. Wait for 30 seconds to 10 minutes before turning the power back on. You may also need to check the following parts: the door latch, part number PS6447681, latch striker, part number PS8690622, and control board fuse, part number PS12743197. We hope this information is helpful!
Dishwasher door doesn’t have resistance and falls. So I need apart calls friction pot
For model number GDF630PSM0SS
Hi Mike, thank you for contacting us. Based on our understanding of the issue, we would suggest replacing the door cable, part number PS7320283, to solve the problem. It connects the door spring to the door hinge and allows the door to drop down slowly when it is opened. Glad to be of help!
Hello, when I close the door to the dishwasher the control panel lights do not come on, and the buttons do not work. It latches firmly and stays closed. Could it just be that the door latch itself is bad?
For model number GDF630PSM0SS
Hello Spike, thank you for reaching out. Yes, it could very well be a bad door latch assembly, even if the door seems to be closing and latching firmly. The latch contains an electrical micro-switch that must be fully engaged to send a signal to the control board, indicating that the door is securely closed and that it is safe to begin a cycle. We would suggest replacing it, the part number is PS6447681. We hope this information helps!
is there a more thorought reset procedure other than turning power off and on? This machine operates normally except will not drain. Pump does not come on. Just wondering if a reset might help but the simple reset does not. Wanted to try more detailed reset before pulling machine and pump.
For model number GDF630PSM0SS
Hello Terry, thank you for your inquiry. As you have already reset the unit and the issue still persists, we would recommend checking the drain hose for any clogging. If this is not the issue, we would suggest replacing the drain pump, part number PS12582714, to solve the problem. Glad to be of help!
Took off the kickplate, diconnected the wires and removed the whole door by lifting straight up, removing spring wires from hinges. Once door is disconnected from the machine, removed one hinge by removing bolt. Slid gasket into place, secured hinge back in place, then reconnected wires at bottom, replaced hinge spring wires and slid d
... Read moreoor back down onto hinges. Now that we know how to do it, could do it in 15 min to half hour.
1. Turn off breaker supplying power to dishwasher in electrical panel 2. Open dishwasher door 3. Unscrew the screws that secure the dishwasher to the counter. 4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch. 5.
... Read more On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside. 6. Remove old door latch. 7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in. 8. Plug wire harness into new door latch. 9. Re-align dishwasher and re-secure to counter in previous position. 10. Test latch to make sure it closes properly. 11. Turn on breaker in electrical panel. The dishwasher should now function properly.
1. Pull out dishwasher (not all the way) 2. Open the door. 3. Remove the white rope holding the door hinge (both sides) 4. Remove the door by pulling up when the door is open about 4-8 inches. 5. Lay the door on the floor ( put something under the door so not to scratch the front. 6. Remove the small bolt at the bottom of the door (both
... Read moresides). 7. Slide the hinge back, up, then out. 8. Where the hinges were are another set of bolts, remove those (both sides) 9. Grab the top part of the door (the part with the buttons) and slide apart. 10. Remove the styrofoam carefully. 11. Disconnect the wiring harness. 12. Remove the 6 screws holding the Despenser tray in place. 13. Put in new Despenser tray and put everything back together.
