This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches...
This part is a replacement gasket for your dishwasher. The gasket creates a seal at the bottom of the dishwasher tub, so water does not leak out while the dishwasher is running. If you notice water le...
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a bro...
The tub gasket, also known as the door gasket runs along the perimeter of your dishwasher basin and creates a seal that prevents water from leaking out when the tub is full. If you notice water on the...
This dishrack is for dishwashers. The dishrack holds the dishes in place during the dishwashing cycle. Follow the instructions in the manual when installing this part.
This is a flood switch assembly for your washer. The flood switch controls the hot and cold water filling your washer tub to ensure the proper amount of water. You may need to replace this part if you...
The element heating assembly is found at the bottom of the dishwasher tub, and helps to warm the water in the wash cycle, and dry the dishes afterward. If the water does not heat up during the wash cy...
This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuou...
This mounting bracket is manufactured to secure your dishwasher to your countertop. Mounting brackets should be installed so the dishwasher doesn’t tip forward. You can fit the bracket to either the c...
This is a washer inlet valve assembly for your dishwasher. This valve allows water to flow into your dishwasher at the proper rate. If your dishwasher tub is not filling with water or filling when the...
This dish rack is for dishwashers. Dish rack holds the dishes in place during the dish washing cycle
$91.27
In Stock
Questions And Answers for GDF520PGJ2BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
January 24, 2020
Will not start, beeps 3 times and leds flash
Unplugged it for 1 hour no results
Pressed cycle/start for 10 seconds leds flashed 10 times and lock led stayed on
Tried pressing heat/start no results
For model number GDF520PGJ2BB
Hello, Thank you for your question. Looking at your model number I would recommend looking into replacing the Door latch. If there is an issue with that, it will cause the unit to not start, and could cause the lock light that you see. Part#PS6447681. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
September 8, 2021
Dishwasher was washing and now has shut off no power to the board no power at all
For model number GDF520PGJ2BB
Hi Todd,
Thank you for your question. If your dishwasher is not working, the part that fixes the issue most of the time is the door latch. If the door latch is fine, there are some other parts that you will need to check to see which one is causing the issue. You will also need to check the the electronic control board, the latch striker, and the user control and display board. You will find the information on how to test these parts under Free Repair Help and Instant Repairman on our website. We hope this helps! Good luck with the repair!
Start and normal lights are on ,pushing to start won't start
For model number GDF520PGJ2BB
Hello Gyula, thank you for your question. We would recommend testing the door latch. If the latch does not activate the unit will not start. The latch is PartSelect Number: PS6447681. I hope this helps.
Was this helpful?
Thank you for voting!
George
September 22, 2022
Dishwasher will not start, I pushed the start button and all it does is blink and beep that is the light for the start button
For model number GDF520PGJ2BB
Hello George, thank you for contacting us. We would recommend checking the following parts to fix your issue: Door Latch, part number PS6447681, Electronic Control Board, part number PS16729164, Latch Striker, part number PS8690622, and User Control and Display Board, part number PS16762512. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
How do you replace the latch striker? I replaced the door latch recently and it worked for about three months and will not start now.
For model number GDF520PGJ2BB
Hello Mark, thank you for the query. According to our research, the issue is due to the faulty door latch, part number PS6447681. You may need to check the door latch to fix the issue. We are providing you with a video link that will help you replace the latch strike. We hope this helps!
Took off the kickplate, diconnected the wires and removed the whole door by lifting straight up, removing spring wires from hinges. Once door is disconnected from the machine, removed one hinge by removing bolt. Slid gasket into place, secured hinge back in place, then reconnected wires at bottom, replaced hinge spring wires and slid d
... Read moreoor back down onto hinges. Now that we know how to do it, could do it in 15 min to half hour.
We tried cleaning out the filter and it clogged with a huge amount of gunk. We removed the gunk, scrubbed the filter, and tried running the dishwasher, but still no water. That took over an hour (not counting the time the dishwasher spent running). Then we tried your diagnosis center and it pointed to the flood switch or the water valve.
... Read moreI extracted the flood switch (another 30-60 minutes) to check it, and it also contained gunk and (significantly) did not rattle, which made me suspect the flood switch was the problem, so I ordered one. Once the replacement arrived, I checked it and the flood switch rattled, confirming that it should work properly. I spent 30-45 minutes installing it, plus the filter assembly and racks I had to remove to access it. Ran the dishwasher and everything came out sparkling clean. I don't know where the gunk came from, but if you aren't getting water and the filter is full of gunk, check the flood switch.
1. Turn off breaker supplying power to dishwasher in electrical panel 2. Open dishwasher door 3. Unscrew the screws that secure the dishwasher to the counter. 4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch. 5.
... Read more On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside. 6. Remove old door latch. 7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in. 8. Plug wire harness into new door latch. 9. Re-align dishwasher and re-secure to counter in previous position. 10. Test latch to make sure it closes properly. 11. Turn on breaker in electrical panel. The dishwasher should now function properly.
