All Installation Instructions for Frigidaire Refrigerator FGSC2335TD5

closed the door and broke the draw

The repair was not it. It was the customer service by the ladys that answered the phone. Both of them were the same as to give me a perpaid return shipping label and my money back. It was like being at the return desk at W.M. and not like at some of the on line service I have come to know...

Gene

Parts Used:

Refrigerator Crisper Drawer

Gene LaFond from NAPAVINE, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Support pins snapped off.

Followed video on your site. It was very helpful.
Thank you.

Parts Used:

Crisper Cover Support - Front

Pan Cover Insert

Fred from SPRING LAKE, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Not making ice and leaking water from aebecause the icemold in the ice maker cracked

Removed the trough that catches the ice.. two philips screws to take the front cover off. Side and bottom. Than quarter inch to remove cover over wires. Unplug ones to ice maker. Slide out a little and down. May be a zip tie in the back cut with sheet rock knife. Reverse to install.

Parts Used:

Ice Maker Assembly

Dave from WEST DEPTFORD, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

No water to ice maker

Repair was easy. Unplug refrigerator, turn off water to ice maker, remove back panel, disconnect water inlet valve, disconnect water supplies and electrical connections. Cut ends off tubing to modify to new part connections, connect tubing, connect electrical supplies, reinstall back panel, plug refrigerator in, turn water supply back on. We made sure that there was no ice build up in the supply tube into the ice maker and made sure that everything worked correctly before putting it all back together. It was an easy repair.

Parts Used:

Refrigerator Water Inlet Valve

Joel from SODUS POINT, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench (Adjustable)

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Water was leaking from the old valve

Watched the video on your website and you can’t go wrong.
Thanks for being there
Mike

Parts Used:

Refrigerator Water Inlet Valve

Michael from Double springs, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable)

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

NO PROBLEM JUST DECIDED IT WAS TIME TO CHANGE FILTER

VERY EASY SLIDE OLD ONE OUT AND PUT NEW ONE IT

Parts Used:

Air Filter

Gregory from POTTSTOWN, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Icemaker was producing hollow ice due to water was free flowing out the water dispenser during fill time for icemaker.

Removed old water valve w/ screwdriver, cut threads off old hose (as they just plug straight into new valve) & pushed hoses into new water valve. Solved both problems!!!!

Parts Used:

Refrigerator Water Inlet Valve

Melissa from Olden, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Fridge started making a loud racket. Condenser Fan Blade then disintegrated to dust and pieces. The plastic had degraded significantly.

The repair itself total time was quick and easy. Since the original fan blade blew apart, it was only a matter of putting the new one on in it's place. This can be done by feeding the blade between the cowling and Condenser coil and applying pressure to get it on the shaft.

If your fan is still on the shaft, simply push it off and extract it the same way. Then place the new one on the shaft.

In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.

Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.

Hope this helps someone. :)

Parts Used:

Condenser Fan Blade

Jack from WALLING, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Drawer was cracked and shelf was broken on one side

No repair needed just replace shelf and drawer

Parts Used:

Refrigerator Crisper Drawer

Crisper Drawer Cover - NO Glass

Karin from FAYETTEVILLE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Broken clear plastic shelf

Simply remove & replace
No tools required

Parts Used:

Refrigerator Door Bin

David from VALENCIA, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Ice maker was over filling.

Old valve comes out with 2 screws, water lines removed and reinstalled on new valve just as they came off the old valve. Entire job took less than 10 minutes. Very easy replacement.

Parts Used:

Refrigerator Water Inlet Valve

Richard from Marco Island, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Replace cracked gallon door bin

Easy to order on line. Access to schematics let me pick the right part.Fast delivery in two days. Easy to install. slide up and out . Slide new one in.
Thanks for quick service.

Parts Used:

Door Bin

Ralph from Fountain Inn, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

I dropped and broke the glass coveriing the pan while cleaning the fridge

Took the part out of the box and slid it in to place. It fit perfectly!

Parts Used:

Pan Cover Insert

JOHN from HELOTES, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken hinge bearing, refrigerator door, top bearing

1. Using Philips head screwdriver, remove plastic hinge cover on top of refrigerator door.
2. Remove bolts using socket wrench.
3. Lift door from bottom hinge.
4. With Philips head screwdriver remove screw holding bearing in place on bottom of door.
5. Remove old bearing.
6. Install new bearing.
7. Replace fridge door using reverse steps.
8. Enjoy your handi-work.

Parts Used: