FGHT1832PP3 Frigidaire Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
Parts Used:
-
Greg from henrico, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Getting the light socket to snap back in properly
-
Robert from HELENA, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken clip on the shelf on the bottom of the door
I watched the short repair video that was provided for the do it yourself persons.And I put the new shelf in place in the door myself it was fast and easy .
Parts Used:
-
Jeff from Green Bay, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shelf broke
-
Billiejean from West Bloomfield, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken crisper glass
-
Charles from Rogers, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Just wanted to add additional shelf.
-
James from Peoria, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Freezer door sagging due to warped hinge
Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.
Parts Used:
-
Keith from Springfield, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Door Shelf Bin
Lifted out the broken bin, set in the new one. Less than 5 minutes. Someone had replaced the bottom shelf bin earlier with a middle shelf bin, so I was a bit confused. The phone rep was extremely helpful in finding the right part. I called the order in on friday, received and replaced it on saturday! Wonderful experience all around.
Parts Used:
-
Arnold from Barnegat Light, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The bottom door shelf would fall off even if there weren't a lot of jars and bottles on it.
All we had to do was remove the bad door shelf by just taking it off - very easy to snap off - it takes about 10 seconds. Then we replaced it just as easily. The new one fits perfectly and we can put many bottles and jars on it, thus giving us more room on the shelves in the refigerator to store things.
Parts Used:
-
MARK from LITTLE NECK, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Needed a replacement door shelf
Was extremely pleased with ease of ordering and prompt delivery of the part.
Parts Used:
-
Suzan from Sarasota, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replacement shelf
Removed old shelf and installed new one. Glass is thinner than what came with the fridge. So I rearranged the shelves and use the new shelf for lighter items. I could see the shelf bow in the center under the weight of milk, cool aid and juice.
Parts Used:
-
Ryan from Sacramento, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Freezer door sagged & didn't seal properly
Installed Metal hinge(old hinge was plastic) to take out sag of door.(painted the hinge color of refrigerator as hinge doesn't have plastic appearance cover )
Parts Used:
-
Gene from Chesaning, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Door Shelf Bin
I looked inside and around the fridge until I found the Model number. Then I ordered what looked like the right part. Turns out it wasn't, so I called the number on the label where I found the Model number, and got a rep to help me pick out the correct door shelf bins. Once they arrived, they just snapped into place!
Parts Used:
-
Daniel from Portland, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
shelf gliders were broken.
This repair was very simple. I removed the old glass shelf and slid the new one in. I then slid the lunchmeat drawer into place. It looks wonderful and the drawer slides nicely in and out.
Parts Used:
-
Lisa from Broadview Hts, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken shelf slider frame
As simple and easy as removing the old and sliding in the new!
Parts Used:
-
Barbara from Hialeah, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!