All Installation Instructions for Frigidaire Refrigerator FFTR1814LM4

The door shelf retainer bars cracked.

The repair was quick and easy. I simply removed the old/cracked door shelf retainer bars and snapped the new ones into place.

Parts Used:

Door Shelf Retainer Bar

Deidre from FONTANA, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Front upper edge of crisperpan was broken

Slid out old, broken pan and slid in new replacement pan.

Parts Used:

Refrigerator Crisper Pan

Richard from DAYTON, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Had to replace broken crisper shelf frame & broken door shelves

Removed broken parts and snapped in new parts No tools required.

Parts Used:

Crisper Cover Frame - No Glass

Door Shelf Retainer Bar

Outer Banks Realty from Waves, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

None

Real easy took out the broken ones and replaced with the new ones.

Parts Used:

Refrigerator Crisper Pan

Edward from DUMAS, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

door handle broke off

used Phillips screw driver to remove two screws form the top off old handle on top of lower door. slipped new handle on the stud and installed screws in the top of handle .

Parts Used:

Refrigerator Door Handle Set (2 pieces) - Black

Michael from BAY CITY, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The refrigerator door did not come for the opening swing to be reversed

I ordered four bearing hinges and drill holes for the hinges on top and bottom of frezer and fridge doors insert the bearing hinges on the holes and all the other part on the door were able to reversed.

Parts Used:

Hinge Bearing

Benjamin from Jersey City, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set

10 of 24 people found this instruction helpful.

Was this instruction helpful to you?

The original part was plastic/and broke

unscrewed to little bolts and installed the new/metal part we got rfom partselect.If we may say.this is a great company to buy from! Fast!

Parts Used:

Upper Hinge

John from Lancaster, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Repaired Oven Range Light Bulb

The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.

Parts Used:

Light Bulb

Alan from SAN MATEO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

broken glass on top of crispers

Since the glass was broken and gone I just had to slide the new glass on top of the crispers. This was not really a repair, just an exchange of new for the old.

Parts Used:

Crisper Glass Shelf Insert

Teresa from SOUTHFIELD, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Door retainer bars were broken

Pushed down on bar slots

Parts Used:

Door Shelf Retainer Bar

Sheryl from TOMPKINSVILLE, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The handle on the refrigerator broke at the top

Removed the old handle by taking the screw out at the top and sliding the bottom part off. Then slid the new handle on at the bottom replaced the screw at the top and done. Took less than 2minutes from opening the package to done.

Parts Used:

Refrigerator Door Handle Set (2 pieces) - Black

Pamela from FORT MYERS, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Accidentally broke the glass insert.

Simply slide the new glass insert in!

Parts Used:

Crisper Glass Shelf Insert

DAVID from SAN FRANCISCO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Gasket broke on bottom

Popped the old one out and pressed the new one in. Very easy. Pressed new one in my hands. Fits in a channel. Very easy

Parts Used:

Fresh Food Door Gasket - Black

Johnnie from NEWPORT, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator door was not sealing correctly.

Remove screws from lower hinge and carefully remove the door. In my case it was the lower bearing, flip door upside down being careful to remove anything which might fall off first. I removed the door stop and then pulled the broken bearing out with pliers. Then I pushed the new one in and reassembled it.

Parts Used:

Hinge Bearing

Edward from Andover, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Top cools bottom is weak

Unplug, remove 2 screws off back panel inside the freezer. Cut wires on old one and crimped in new one. Light to melt the shrink wrap that came with it. Pretty easy.

Parts Used: