FFHT1514QB5 Frigidaire Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer door sagging due to warped hinge
Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.
Parts Used:
-
Keith from Springfield, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Door Rack
-
Bert from Saint Augustine, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The crisper pan cracked
I took the cracked pan out, waited for the new pan to arrive (2 days) and slid the new pan right in. It was so easy.
Parts Used:
-
Margaret from Norman, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken Door Rack
-
WILLIAM from EL PASO, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door rack cracked in the middle.
-
David from DeSoto, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken handle
-
William from Rio Frio, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door sagged, had to push the door to close it.
Used wood blocks to raise the door off the lower hinge bracket then unscrewed the suspect hinge. Cut a small shim, two layers of soda can, to place under the lower edge of the new hinge bracket and doubled the washers by using the old one to ensure I had adequate clearance for the door. After a little silicone lube I installed the new hinge bracket. All better now.
Parts Used:
-
Michael Jude from Saint Martinville, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
A shelf in my daughter's refrigerator broke
I got the model number and because you offered diagrams I was able to order the correct replacement. The piece slid right in and I thought it was miraculous. It was so easy.
Parts Used:
-
Barbara from Park Ridge, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken Door Handle
Took the 2 screws out... removed the broken handle.. put the new handle on and put the 2 screws back in...
Parts Used:
-
Darlene from Clearwater, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door handle broke off of main door. (not smaller freezer unit)
unscrewed the broken off handle part at the top of the door. Then I turned the new handle into the bottom handle screw in the bottom of the new handle until it fit snuggly to the door. then I slid the top of new handle over top of main door until the screw holes lined up and put new screws in. Easily less then 15 minutes.
Parts Used:
-
Brian from Arlington, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door handle had snapped off from the toop and the small plastic piece on door broke.
Unscrewed the two screws on top of door, removed broken plastic, snapped bottom portion of new handle onto screw in the door and tightened screws on top. Less than 2 minutes.
Parts Used:
-
Charles from St Louis, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken door rack
took the old one out, put the new one in. Will be an ongoing problem due to the flimsy nature of the rack. Refrigerator is in a rental unit. Great to know parts a just a phone call away, and arrive super fast.
Parts Used:
-
Robert from Keene, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Brand new refrigerator (less than 6 months old), and the installation guys had put the screws for the handles in too tight and it had cracked the handle. We did not know this until one of my kids opened the door and the handle finally finished snapping right in the central area of the screw.
I found Partselect.com by accident, and took a chance as I'd never heard of this company before. I was so grateful that they had the part that I needed for a quick and easy fix without having to call a repairman and break the bank. Once the handles arrived in less than a week, it took about three minutes to remove the old handle and install the new one. Thanks a million Partselect.com, your company is a time & life saver.
Parts Used:
-
Beverly from El Paso, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Upper handel had broken at screws
Removed the two screws holding the broken peace to upper portion of door also pulling a dust cover from where the hinge goes when switching opening sides this prevents the stress on the upper part so not to break in the future this is the fragile part of the handle. Slip lower part of handle in screw pull toward you till locks in then turn handle over top to line up with the two holes on top of door install the two screws tighten down not to oven tighten just snug.
Parts Used:
-
leroy from winter haven, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
old rusted freezer shelf
-
Berit from Kirkland, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!