FFFS5115PA0 Frigidaire Washer - Overview
Sections of the FFFS5115PA0
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Door Striker
PartSelect #: PS2378364
Manufacturer #: 131763302
This is a door striker, it is gray in color and is a part found on your washer. The purpose of the striker is to keep your washer door closed for usage. This piece will attach to your appliance lid an...
$34.97
In Stock
Front Load Washer Door Lock and Switch Assembly
PartSelect #: PS12364048
Manufacturer #: 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the do...
$108.73
In Stock
Door Hinge with Bushings
PartSelect #: PS1152380
Manufacturer #: 134550800
This is a door hinge with bushings and works in conjunction with your washer. The purpose of this part is to attach to the outside of the front door panel to help with the lid opening and closing prop...
No Longer Available
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$23.05
In Stock
Bellow Kit
PartSelect #: PS1148773
Manufacturer #: 134515300
Also known as a Door Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately f...
24% OFF
$191.74
$251.45
In Stock
Single Shock Mounting Pin
PartSelect #: PS417323
Manufacturer #: 131268300
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in plac...
$22.00
In Stock
Spring-Held Bellow Clamp
PartSelect #: PS1146211
Manufacturer #: 134527100
Upgrade your home appliance with the Frigidaire Boot Seal Retaining Ring. An original and genuine replacement fastener, this quality piece ensures lasting durability and efficient performance. Special...
$47.33
In Stock
Door Catch Screw
PartSelect #: PS417465
Manufacturer #: 131302901
This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made entirely of metal and...
$11.50
In Stock
Dispenser Drawer
PartSelect #: PS1145699
Manufacturer #: 134370000
This detergent drawer assembly is designed to hold and dispense cleaning agents during the wash cycle. It features separate compartments for liquid or powder detergent, fabric softener, and bleach, en...
$54.01
In Stock
Washer Screw
PartSelect #: PS3495292
Manufacturer #: 137380600
This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This is...
$16.75
In Stock
Drum Baffle
PartSelect #: PS3408272
Manufacturer #: 134952702
Sold individually.
$43.95
Special Order
Manuals & Care Guides for FFFS5115PA0
Click to downloadInstall
Installation Instructions
(5.07MB)
Specs
Product Specifications Sheet
(0.4MB)
Care
Use and Care Manual
(3.07MB)
Wiring
Wiring Diagram
(0.4MB)
Questions And Answers for FFFS5115PA0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 29, 2020
Need to change the drum bearings. Do you sell them or do you have any idea were i get them?
For model number FFFS5115PA0
Hi Mike, thank you for your question. The part you are requesting on has been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute. This was the part number: 134956200. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
OWEN
March 14, 2022
The machine stopped and displays E21.
What may be the problem?
For model number FFFS5115PA0
Hi Owen,
Thank you for your question. If your washer displays E21, it is taking too long for the washer to drain and you will need to check the drain hose to see if it is clogged. You may also have a malfunctioning or clogged drain pump or a malfunctioning electronic control board. You will need to inspect these parts to see which one is causing the issue. If you need help placing an order, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Patrick
May 26, 2022
Error code EAE, replace main control board. Could I confirm it by other test?
For model number FFFS5115PA0
Hello Patrick, Thank you for the question. The EAE error code indicates a "Line safe relay sensing failure". This could be caused by a power supply failure or weak improper power supply. If you tested for 120 VAC 60 HZ. grounded and polarized outlet, then the main control board would be the issue. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the FFFS5115PA0
[Viewing 12 of 12]Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Door Catch
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
Parts Used:
-
Joy from Columbia, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
572 of 591 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Parts Used:
-
DOUG from KING FERRY, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
475 of 561 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Bellow Ripped
remove top of machine by removing 3 screws along the top edge in the back of your machine and then sliding the top back and up. Then loosen the screws holding on the control panel enough to get to the 2 screws at the top of the door panel. Next remove bottom panel by removing 2 screws along bottom edge then pulling it free from snaps. The
... Read more
n along the outside lip of the bellow, just inside the door, is a wire clip that is easily removed by prying it past rubber lip with a screw driver and lifting it away. Remove the door panel by removing the 2 screws you exposed by loosening the control panel and 2 more along the bottom that were exposed when removing bottom panel. After the door panel is removed and the bellow is completely exposed, you will find that it is held in place by a circular spring which wraps the whole way around the drum opening. Again it can be removed by prying it out away from the groove in which it sits with a screw driver. Now your machine is broken down as far as it needs to be. From here you can follow the directions included in your new bellow kit and put it back together by following these instructions in reverse.
Read less
Parts Used:
-
Peggy from New Castle, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
251 of 346 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!