FDB1050REC2 Frigidaire Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dishwasher leaking from the bottom of the door
Bought tub rubber gasket and door gasket online. Neither came with instructions. I went to you tube and found videos that matched my model dishwasher. Only problem was the installation of the gasket for the door. it's plastic and the video said to put it in one way which I did but it did not work. There is a notch in the gasket and watching the video, as you're facing the dishwasher with the door open the notch goes to the right. Dishwasher still leaked. I reversed the gasket, with the notch to the left and that seemed to solve it.
Parts Used:
-
R from EUGENE, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The first bottom door gasket I received was defective.
After ordering the tub gasket and splash shields I ordered another lower door gasket. It was 1/16 of n inch to long but fixed the problem. Did spend a lot of money to get it fixed as called an expert who came over to the house.--Larry
Parts Used:
-
Larry from SMITH CENTER, KS
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Lower Rack, Upper Rack, and Basket were old and started to rust
Took out old. Put in new.
Parts Used:
-
Pamela from LILBURN, GA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old basket had a hole
-
TIMOTHY from ELBURN, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old gasket melted.
Watched installation video and followed directions. All went smoothly.
Parts Used:
-
Al from WOODBURY, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gasket came out
-
tom from SELLERSVILLE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sprayer arm design in newer model was not sufficiently cleaning
Pulled the completely empty bottom rack out, popped the old spray arm off, popped the new one on, and replaced the basket. Easy peasy. One of the easiest repairs possible IF it fixes the problem. (We had an older model Fridgaire dishwasher with this type spray arm versus the one that came in the new one and it worked great for 12 years. Falling back to it in a fashion was a logical attempt at a solution)
Parts Used:
-
Nancy from NUNNELLY, TN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking door
We put the new gasket on the inside of the door at the bottom in the door. It just sides into the bottom of the door. We watch the youtube and it was really easy to do.
Parts Used:
-
Patty from Cleburne, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old door gasket
Trim of 1/16 off door gasket with scissors left rubber at end Does not rub does not leak works great. Thank you very much. I was very satified
Parts Used:
-
Steve from WOODBURN, OR
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leakage
Based on your video instructions on YouTube.Took off door cover. Put old gasket out. Installed the new one. Put door cover back .
Parts Used:
-
Rimma from BROOKLYN, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old gasket was leaking
The old Gasket came right off but it was a little tricky to put the new one on even tho I watch the video. I got the new one in place but it is still leaking going back to the drawing board
Parts Used:
-
Chuck from UNION, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
started to rust the white had come off
-
Ronald from DOUGLAS, GA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced the side rollers in the dishwasher
Removed the old rollers with with screw driver. Used the original screws and washers, and reinstalled the new rollers. Had been having trouble with top dish rack metal slides popping out of the old rollers. I not that the replacement rollers are slightly larger and have slightly deeper groves for the slides. Have not had the new rollers installed long enough to see if they remedied the problem. Will know in a few weeks time. So far, so good.
Parts Used:
-
John from NORTH BEND, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rusted rack
-
Dante from SOUTHOLD, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water
-
Harold from SHELOCTA, PA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!