E23CS78GPS2 Electrolux Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ice maker not working and refrigerator too cold
ice maker= replaced overload,microswitch and solenoid water valves.refrigerator=replaced the thermostat.Great price on parts,very fast delivery and parts were a perfect fit.You made the job very easy. John
Parts Used:
-
John from Loxahatchee, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Frost on the ice maker/door
Removed the ice maker cover on the front (6 screws)...took off old parts and installed new ones....very easy... replaced front cover and no more frost build up in the freezer.
Parts Used:
-
Janice from Shelton, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Support Broken and would not support crisper
Because of the design of the support, this could have been a difficult job. However, with the video that was provided when I selected the part, it was not a problem. All you have to do is knock the center pin through the support and remove the old support. Pull the pin out of the wall of the unit and push the new support in and drive the new pin in until it is flush. That's it!
Parts Used:
-
Robert from Columbia, SC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door hinge was worn down and every time the door opened it made a loud noise that made us wonder if the door was eventually going to fall off!
Once the part arrived, we followed directions to remove the refrigerator door. We removed the hinge cover which was a two-piece topping on the refrigerator. We then were able to remove the door and replace the lower Hinge Bearing. We put the door back on, replaced the cover and the door now opens and closes quietly and smoothly. We are senior citizens and not particularly "handy"....figured we saved ourselves $100. or so. Good deal.
Parts Used:
-
Shirley from Oldsmar, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Tabs that hang the crisper broke
Ordering replacement parts was easy! Expected a simple pull out old plug, insert new plug.... Not sure if it comes from factory like this or if this had been previously repaired poorly, but the broken plug was heavily glued in place. Took some serious finess work to remove without serious damage. Once out, it was simple plug in
Parts Used:
-
Allen from Eagle, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replace Bottom Hinges on refrigerator door
After the original hinge fell apart, I clicked on my bookmarked Part Select www. I simply typed in the model number and followed the instruction straight to a Parts diagram. Both parts I needed were detailed in a scale picture, and were extremely easy to purchase. Partselect is the best appliance part service online, I repair all of my own appliances and save hundreds of dollars on repairs by using the reliable Partselect ordering system. PARTSELECT HAS NEVER LET ME DOWN!!!
Parts Used:
-
Anthony from St George, UT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!