All Installation Instructions for Whirlpool Dishwasher DP920PFGQ2

cut wire in center sprayer to remove plastic holder for new basket

after that every thing went very well

Parts Used:

Dishrack - Rack Only

JOHN from IONIA, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

DOOR leaking

door gasket old the vent was pluged up full of black slime cleaned out and door stopped leaking

Parts Used:

Dishwasher Door Gasket - Gray

mike from SHELTON, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

dish washer leaking out bottom of door

New gasket did not fix problem. Cleaned air vent cover for steam to exit. Gasket not the problem but new one looks good. thank you

Parts Used:

Dishwasher Door Gasket - Gray

Ed from Ulysses, KS
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Not dispensing detergent

Followed instructions as the videos on this page show.

Parts Used:

Dishwasher Soap Dispenser Cover

Dishwasher Lid Hinge Pin

Mandy from GREENWOOD, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Silverware basket was broken

Removed old basket and popped in new basket.

Parts Used:

Silverware Basket

Betty from Warren, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

poor water circulation

follow instructions, unscrew old part, screw in new part, worked like new

Parts Used:

Nozzle Cap

Wade from New Carlisle, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Needed an adapter to run the appliance

Very easy,take off the old faucet screen and screw on the adapter. What I really liked was the ease of ordering the part. In less than 5 minutes I had located the part and ordered it. Less than 3 days later, I had the part. Way to go PartSelect.

Parts Used:

Dishwasher Faucet Adapter

Theresa from Yardville, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Leaking Dishwasher

I poked the old gasket with a fork tine so I could get a grip on the old gasket as I didn't have pliars, pulled it out in less than 4 seconds, folded the new gasket in half and started center top of the slot the old gasket was in and pushed the new gasket in on each side from the top to the bottom. Very easy. I'd say it took me longer to open the package with my teeth than in doing all of the above.

Parts Used:

Dishwasher Door Gasket - Gray

Althea from Vancouver, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

original dishrack had become rusty

installed a new rack

Parts Used:

Lower Dishrack Kit

Tom from Peoria, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Dirty Dishes

Nozzle cap rubber housing was split and cracked. It simply unscrews. The replacement was a matter of screwing the new nozzle cap on. My wife was trusted with this installation. Believe me, this indicates how easy it was.

Parts Used:

Nozzle Cap

George from New Freedom, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Soap door wouldn't open.

I looked online to see a video. Dad to pop lid off soap dispenser. Slide a plastic part to the left n the spring slide off. Video showed how to place prongs on spring . Then had to lift the upper part of spring to lift onto plastic part of soap dispenser. That was it.

Unfortunately it still doesn't work. I asked Ina email to your company for any suggestions, No reply.

Parts Used:

Dishwasher Detergent Lid Spring

Anthony from CLEVELAND, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Tine on rack was rusted and needed to be replaced.

Just replaced it in the notches that held the rusted tine.

Parts Used:

Tine Row

Jeanne from FAYETTE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

P piece of the adjuster rack was deteriorated and broke off

Crazy Glued it together until we received the new part, but it fell off again. My husband installed the new piece and said it only took him about 2 minutes. You just take off the end cap and pop in the new piece and adjust to match the one on the other side of the rack. He said it was extremely easy and no tools required.

Parts Used:

Dishwasher Rack Adjuster

Kathleen from PALATINE, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Rack Was Rusting Out

Kit didn't have the center conical piece. Easy to switch tho. I am impressed at the speed of which the part arrived.

Parts Used:

Lower Dishrack Kit

William from Rochester, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Dishwasher Not Heating top rack wet dishes and heating rod looks rusted

It took all of 30 minutes from beginning to end remove the old parts and replaced them and run a diagnostic test before I could wash dishes. The parts were exact and Parts Select has always provided the right parts, shipped fast and never disappointed me.

Parts Used: