CSG9900AAB Maytag Cooktop - Instructions

lenny from east freetown, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Worn out stove top

We replaced the burner grates, knobs, air filter and burner pan. Looks as good as new!

Parts Used:

Redona from Roseville, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Old grease filter had hole wore through

Pulled the old one out & inserted the new one. Less than five minutes.

Parts Used:

Michael from Mountain Iron, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Burners would not light sometimes

Slide stove out unplug remove cover on back bottom left 3 screws remove wires from old module and plug into new module could not remove old module I glued new to old replaced cover pluged back in slide stove back in and the burners lit

Parts Used:

Surface Burners Spark Module Kit

Robert from St. Remy, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Burner wouldn't light.

Took out a couple of screws and put in the new part. PartSelect was fast and efficient. Highly recommended.

Parts Used:

Clark from Tifton, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Needed to replace the grease filter!

Followed the directions. Piece of cake!!

Parts Used:

Colette from Annapolis, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Burnner rusty and will not start with electric start.

Removed and installed burners in less than 15 min with just a nut driver. Replacing the burn ere did not fix the starting problem, but replacing them did improve the hurried flame.

Parts Used:

Robert from Mary Esther, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

old yucky filter

Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!

Parts Used:

Diane from Flower Mound, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

rotten filter for down draft vent

How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!

Parts Used:

Craig from Ashburn, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The paint begin popping of my original grill. My son had a friend that said that he could remove the old paint and repaint for me. Unfortunately in the shuffle of a motorcycle performance shop the grill was lost. I have been trying to get help from Jenn-Aire since March and they just kept saying th

Very simple for me!!! Open the box, uncover the new grill and lay it in its place.

Thank you so much!

Parts Used:

Vent Cover - Black

Norma from Salisbury, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The paint had chipped and peeled on the inlet grill

I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!

Parts Used:

Vent Cover - Black

Ann from Irvington, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Replacement

This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,

Parts Used:

Barb from Holladay, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

rear burner not working

removed two hexigon screws--removed old burner---placed new burner into stove socket--replaced two screws. Done in about five minutes. Most time used to fine right size socket to fit screws! Fast delivery--easy repair--AND it works!

Parts Used:

Larry from Washington, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

Was this instruction helpful to you?

Holes in the air filter of our Jenn-Air grill

Simply pulled the old filter out and put the new filter in.

Parts Used:

Janice from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Old burners

The issue: the burners were abused by the previous tenant, the burnt grease was clearly visible. They would hardly ignite and the smell of gas was always present.The remedy: new burners. They were hard to find, I was not completely sure about to stove model (it could be quite a search to find the right ones). There is a front burner and a back one. I was not sure from the diagram about the back one, so I called Partselect and someone answered the call right-away. The burners arrived a few days later, and they were the correct ones. The burners are not Jenn-air specific, it looks like several brand names use the same ones. The installation was extremely easy, a few hex screws. The stove is like new. I highly recommend Partselect.

Parts Used: