Models > CC1W

CC1W Amana - Overview

Models starting with CC1W

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Surface Burner Plug-In Block Kit – Part Number: 330031
Surface Burner Plug-In Block Kit
★★★★★
★★★★★
(18)
PartSelect #: PS340571
Manufacturer #: 330031
The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to...
$13.42
  In Stock
Drip Bowl Kit - Light Gray – Part Number: W10291024
Drip Bowl Kit - Light Gray
★★★★★
★★★★★
(13)
PartSelect #: PS2377843
Manufacturer #: W10291024
This is a kit of 4 drip bowls. This includes 2 large pans and 2 small pans. All pans have holes in the bottom and they are light gray in color. The large bowl is for an 8-inch element and is 10 inches...
$49.93
  In Stock
Surface Burner - 8 Inch - 2600W – Part Number: WP660533
Surface Burner - 8 Inch - 2600W
★★★★★
★★★★★
(17)
PartSelect #: PS11743367
Manufacturer #: WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter...
$36.93
  In Stock
Surface Element - 6 Inch – Part Number: WPW10259868
Surface Element - 6 Inch
★★★★★
★★★★★
(2)
PartSelect #: PS11751368
Manufacturer #: WPW10259868
This surface burner heating element is six inches in diameter. It has four turns and looped terminal ends. Sold individually.
$103.59
  In Stock
Surface Burner Element - 8 Inch – Part Number: WP3191454
Surface Burner Element - 8 Inch
★★★★★
★★★★★
(2)
PartSelect #: PS11740903
Manufacturer #: WP3191454
This surface burner element is a genuine OEM replacement part for your kitchen appliances. It measures 8inches in diameter with a wattage of 2100W. You will need to replace the element if you notice t...
$110.85
  In Stock
Installation Screw – Part Number: WP3400882
Installation Screw
★★★★★
★★★★★
(2)
PartSelect #: PS11741612
Manufacturer #: WP3400882
This screw is sold individually.
$8.04
  In Stock
Screw - 6-32 x 5/16 – Part Number: WP74004005
Screw - 6-32 x 5/16
PartSelect #: PS11744050
Manufacturer #: WP74004005
This screw is well under an inch long, and is made of metal.
$5.36
  Special Order
Ground Contact Spade – Part Number: Y0052041
Ground Contact Spade
PartSelect #: PS1743150
Manufacturer #: Y0052041
Sold individually. This spade is used for either a ground contact or a power contact.
  No Longer Available
SCREW – Part Number: W11245710
SCREW
PartSelect #: PS12578937
Manufacturer #: W11245710
Sold individually.
$14.09
  In Stock
Surface Element Kit – Part Number: 4392061
Surface Element Kit
★★★★★
★★★★★
(1)
PartSelect #: PS373085
Manufacturer #: 4392061
This kit includes two 8" elements, two 6" elements, four receptacles and any remaining hardware needed for installation.
$111.51
  In Stock
SCREW – Part Number: 3179776
SCREW
PartSelect #: PS337629
Manufacturer #: 3179776
  No Longer Available
SCREW, #6-32 X .500 PAN HD PH – Part Number: 31750304
SCREW, #6-32 X .500 PAN HD PH
PartSelect #: PS78382
Manufacturer #: 31750304
  No Longer Available
View More
Back to Top

Common Symptoms of models starting with CC1W

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Back to Top
Replacing the Drip Bowl Kit - Light Gray

Replacing the Drip Bowl Kit - Light Gray

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I needed drip bowls that fit properly
I ordered gray enamel drip bowls and they fit perfectly. Unfortunately 2 of them were chipped and bent slightly. They still worked which was better than the make shift ill fitting ones that came with the house so I decided to keep them. I did tell parts select about it and they sent me a new order of drip pans at no charge. I used the perfect ones but the 8" drip pans flaked off paint after one use. I guess this is an Amana defect...the paint doesn't stick under heat.
Read less
Parts Used:
Drip Bowl Kit - Light Gray Drip Bowl Kit - Light Gray
  • Marilyn from Peachtree City, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
92 of 96 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
8 inch burner wouldn't come on. Wires shorted out
One screw holds the block onto the stove top. Had to clean out fitting for phillips screwdriver or screw would have stripped because it was old with lots of buildup. Even cleaned out, this screw required great force with phillips screwdriver to keep from stripping. Caution! If you strip it, you'll have to drill it out! The rest was a snap. Cut the old wires leading to the old block (not too close to where wires disappear into back of stove, though!). Strip insulation off both wires and attach with the connectors that came in the kit. Then push the wires into the block, and finally, attach the block back to the stove top (new screw is supplied). Restore power and everything should be fine. One problem: Roper/Whirlpool built their appliance in such a way that when the connector block shorts out, it usually takes the infinite switch with it. So I ended up having to go back and purchase that switch as well (which just so happens to cost twice to three times as much!). If you put it all back together and it still doesn't work, that's probably what happened, so go ahead and remove the knob panel and check that switch (it's right behind the control knobs on the front). You will probably find a burned connector at the back top left or the switch. Don't forget to write down which wire goes where (or just take a picture of it).
Read less
Parts Used:
Surface Burner - 8 Inch - 2600W Surface Burner Plug-In Block Kit
  • Jonathan from Lilburn, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
61 of 72 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Chipped and discolored pans
This purchase was for replacement parts, not for repair. Installation was a simple matter of taking out the old and installing the new, which is extremely easy to do. One item was damaged; Parts Select was absolutely fantastic to deal with regarding replacement! One word of caution regarding the product - I mistakenly ordered Whirlpool drip pans which have an opening in the bottom, the Maytag pans don't. Initially I thought that it was a mistake by Parts Select; which wasn't the case. The pans fit perfectly so I kept them. If I reorder, I will be certain that I order the correct pans.
Read less
Parts Used:
Drip Bowl Kit - Light Gray
  • Susan A from Millsboro, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top