This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
N
December 4, 2019
What happening when washer do not make spin cycle correctly
For model number CAE2743BQ0
Hello N and thanks for writing.
It sounds like a faulty drive belt PS11747978 check and replace if needed. We hope this helps. Please contact us anytime.
Washer has all lights on control panel including Lid Locked illuminated at once. Unplugging machine and reconnecting won’t clear the lights, nor will trying to restart by inserting more coins. I don’t see any timer in the coin box,
Only one connection (2) wire plug.
For model number CAE2743BQ0
Hi Peter, thank you for contacting us. Based on our research, the issue is most probably with the control board. We recommend replacing the control board, part number PS11737994, to solve the problem. It manages the washer's functions such as filling, washing, draining and spinning. Glad to be of help!
Hi Rick, thank you for the question. Based on our understanding, we would suggest to insert another coin into the slot and push in the chute. A coin tilted to the side may be obstructing the slot. Check to see if anything is blocking the coin chute inside. If the issue persists, you may need to replace the coin chute, part number PS12114464. We hope this solves your problem!
BROUGHT WASHER FOR APT NEVER HAD A KEY BROUGHT WASHING MACHINE FROM OFF FLOOR SALES HOW CAN I GET A KEY FOR THE MONEY BOX
For model number CAE2743BQ0
Hello Cynthia, Thank you for reaching out. The key for this model is listed as PartSelect Number PS11748422 and PartSelect #: PS12711528. We hope this helps!
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read moreand put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.