9612XUB Magic Chef Wall Oven - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the 9612XUB
oven light burnt out
1. Unscrewed glass cover on bulb 2. Removed old bulb 3. Screwed in new bulb 4. Replaced glass cover 5. Mixed drink & baked cupcakes
Parts Used:
William from Schwenksville, PA
Total Repair Time:
Less than 15 mins
3 of 9 people
found this instruction helpful.
Thank you for voting!
Lower oven heating element burnt out.
I shopped around locally before shopping online. Parts Select provided me with significant time and money savings. Turn off power. Remove the element. Installed the new element. Turned on the power. Easy... Easy... Easy...
Parts Used:
Coreen from Hagerstown, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 4 people
found this instruction helpful.
Thank you for voting!
thermostat temprature bulb hanger clips
snaped them into oven cavity attached temp bulb job complete
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 4 people
found this instruction helpful.
Thank you for voting!
bake element in lower oven had burned out
I made the mistake of thinking that, if the oven was off, there would be no voltage to the heating element. Wrong! I removed the element, wearing rubber gloves just for safety, and had no problem. But when I put the wiring back on the new element and tried to slide it into the hole at the back of the oven, one of the wires brushed the metal, sparks flew, and melted one of the wires. Even though the oven was off, this wire was hot. The solution was, of course, just to turn off the circuit breaker, reconnect the wire, and slide the element back in. It works fine now.
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Burned out element
Very easy since it was an exact match to the old burned out element.
Parts Used:
Robert from Scotch Plains, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 of 4 people
found this instruction helpful.
Thank you for voting!
light bulb went out in my oven
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 7 people
found this instruction helpful.
Thank you for voting!
Bulb Replacement
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
replaced oven lightbulb
peggy ann from forest city, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Light burned out in upper oven
Screwed in light bulb and glass protector
Parts Used:
Shirley from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Glass door shattered
Replaced glass door - very easy.
Parts Used:
Avi from Philadelphia, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 2 people
found this instruction helpful.
Thank you for voting!
burnt out element
Very easy. remove two screwa , pull element forward, unplug.Set new element in place, plug in. push back in. Screw in both screws and your done.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Very Easy
Changed bake element in oven.
Parts Used:
Robert from North Canton, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Thank you for voting!
Heating element not working
Unscrewed two screws, unplugged two small plugs, plugged the new ones in and screwed the screws back in. Less than 10 minutes.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Oven light Switch
Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.
Parts Used:
William from APACHE JUNCTION, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
would not heat
put the old one out,put new part in that easy,works like new
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
All Instructions for the 9612XUB