EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > 96061033800 > Instructions

96061033800 Husqvarna Lawn Mower - Instructions

All Instructions for the 96061033800
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Parts Used:
Lawn Mower Ring Clip Cap Axle Black 1 50 x 1 00
  • Anthony from OLIVEHILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
23 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original shield was damaged
Removed original shield ( 2 bolts), replaced with new shield.
Parts Used:
Shield
  • Wayne from LAKEVILLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Parts Used:
Lawn Mower Key
  • Gary from PILESGROVE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The tie rod on my 20 year-old lawn tractor snapped.
I used two wrenches, unscrewed both ends of the old tie rod and it fell out. In nearly no time, I had the new one in. After finding the right end wrenches, I don't think I had more than 10 minutes into the project. Easiest repair I have done on anything in a long time!
Parts Used:
Rod
  • James from CEDAR SPRINGS, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer runs no heat
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
Parts Used:
Solenoid Lawn Mower Ignition Switch
  • Russell from MACON, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Parts Used:
Lawn Mower Washer
  • Frederick from BINGHAMTON, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
10 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 96061033800
1 - 6 of 6