All Installation Instructions for Kenmore Range 79092412102

switch not always turn off

Took upper back off ( 6 screws), chech to be sure was right switch, pulled spade clip wires of, put on new switch, checked to see that it worked, replace cover.

Parts Used:

Infinite Burner Switch - Large Element

Jerrold from San Marcos, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

7 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Heating element broke

Removed two screws in over pulled out part took off wires and put them on new elememt

Parts Used:

Bake Element

Joseph from Winter Park, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Oven wasn't heating properly for a few months and then stopped altogether

The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.

Parts Used:

PROBE

Matt from KENNETT SQ, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Oven racks rusted

Ordered new racks and replaced them.

Parts Used:

Oven Rack

Wendell from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Broken Drawer Glide

It snapped right into the drawer, was very easy

Parts Used:

Rear Drawer Glide

Sharon from Hamlin, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator Light bulb went out

I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.

Parts Used:

Light Bulb

ANGELA from MEBANE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

broken lens over oven light

Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....

Parts Used:

LENS

Leslie from Warsaw, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 22 people found this instruction helpful.

Was this instruction helpful to you?

The elements were not heating up

It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!

Parts Used:

Main Terminal Block Kit

Tanya from KALISPELL, MT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

old element coil burned apart breaking the circuit.

removed the old burner and put the new one in it's place.

Parts Used:

Radiant Element with Limiter - 1200W

James from WARRENTON, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

switch had a diffirent lug configuration

made a drawing as to where the wires were to placed on the new switch,took longer to do this than finding right tools. Important safety tip,always pull off the required breaker!!!

Parts Used:

Infinite Burner Switch - Large Element

Robert from Andrews, SC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

9 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Broken ; oven door inner glass

Watched the repair video on your web site. Used the video as a step by step guide in the actual repair.

Parts Used:

GLASS

Garland Futrell from CHESAPEAKE, VA
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Overlay was destroyed from use

Took back off the oven unscrewed the time control scaped old one off and put new one on. Than I put it back together again.
What a great place to shop!!!

Parts Used:

Clock Overlay - White

Doug from Laramie, WY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Glides broke on lower storage drawer

The front glides easily snap into a hole on the sides of the range. The rear glides easily snap onto the sides of the lower rear of the drawer.

Parts Used:

Rear Drawer Glide

Front Drawer Glide

James from WEST BEND, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Burners getting too hot.

Watch video. This oven had the connecters that popped off and on which made this task easy.

Parts Used:

Infinite Burner Switch - Large Element

Infinite Burner Switch - Small Element - 240V

Leslie from CONCORD, NC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Oven fall on its front door and broke all the glass and the handle.

First I removed all of the glass and broken parts. Next I placed the foil pieces on the back side of the glass. Next I put the glass into the slot. I then put the cap into place and then aligned the handle over it. With the help of another person, I inserted the screwed into the and saved us a lot of money that wback of the door (which is probably the hardest part) and tightened them. Everything looked great e would have spent on a new range.

Parts Used: