All Installation Instructions for Kenmore Dishwasher 6651570592

Lost Screws from lower access covers for my Dishwasher

Reassembled lower access covers using the new screws purchased from parts direct, perfect fit replacement. Hardest part remembering how they fit Dishwasher.

Parts Used:

Screw - 8-18 x 1/2

Johnny from LEVITTOWN, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

i had a leak under the dishwasher when the pump turned on.

I replaced the seals per the video instructions.

Parts Used:

Drain and Wash Impeller Kit

Walter from KINGSPORT, TN
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)

1 person found this instruction helpful.

Was this instruction helpful to you?

Soap door wouldn't open.

I looked online to see a video. Dad to pop lid off soap dispenser. Slide a plastic part to the left n the spring slide off. Video showed how to place prongs on spring . Then had to lift the upper part of spring to lift onto plastic part of soap dispenser. That was it.

Unfortunately it still doesn't work. I asked Ina email to your company for any suggestions, No reply.

Parts Used:

Dishwasher Detergent Lid Spring

Anthony from CLEVELAND, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Tine on rack was rusted and needed to be replaced.

Just replaced it in the notches that held the rusted tine.

Parts Used:

Tine Row

Jeanne from FAYETTE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Insulation needed replacing

I searched for the 18x5x5 insulation.,ordered it from Part Select. Waited. Company sent wrong part. Called, they gave me a refund, reordered, promised 2 day free shipping. Waited more than a week, paid for 2 day shipping. Received same, wrong part. Still don't have repair done. Looking elsewhere for part.

Parts Used:

Access Panel Insulation with Glue

Mollie from CANTON, NC
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours

1 person found this instruction helpful.

Was this instruction helpful to you?

Rack Was Rusting Out

Kit didn't have the center conical piece. Easy to switch tho. I am impressed at the speed of which the part arrived.

Parts Used:

Lower Dishrack Kit

William from Rochester, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Door hinge broke

All pieces just snap off and the new one just snap right back in place.

Remeber take a little time to do your repair correctly.

It is cheaper to repair an appliance than it is to replace.

Parts Used:

Detergent Dispenser Cover Kit

David from Vancouver, WA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

7 of 19 people found this instruction helpful.

Was this instruction helpful to you?

original dishrack had become rusty

installed a new rack

Parts Used:

Lower Dishrack Kit

Tom from Peoria, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Door spring broke

It took longer to take the 2 screws out than it did to put spring on.

Parts Used:

Dishwasher Door Spring Assembly w/Adjusting Hook

Kyle from Jonesborough, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

lower rack started to rust through coating

Since there were no printed instructions, we looked at the photo schematic.
Reassembly using the photo was easy by putting the old rack alongside the new one and adjusting the new rack spacing to match the old one.
We also had new wheels which snapped on.
We were delighted to repair and replace this good, older dishwasher rather than purchase a new one!

Parts Used:

Lower Dishrack Kit

Carol from St Johnsbury, VT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Dirty Dishes

Nozzle cap rubber housing was split and cracked. It simply unscrews. The replacement was a matter of screwing the new nozzle cap on. My wife was trusted with this installation. Believe me, this indicates how easy it was.

Parts Used:

Nozzle Cap

George from New Freedom, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

The Cutter Spring was totally disfigured and pulled apart. Not functional.

Repair went exactly like the video i watched online. Perfect

Parts Used:

Drain and Wash Impeller Kit

Aubrey from BERKELEY LAKE, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

THE LOWER RACK WAS CORRODING IN SPOTS AND WAS RUSTING

THERE WERE NO INSTRUCTIONS INCLUDED, COULDN'T FIGURE 0UT HOW TO INSTALL THE NEW ROLLERS ON THE NEW RACK FINALLY INSTALLED THE OLD ROLLERS ON THE NEW RACK AND THEY WERE MUCH EASIER TO INSTALL I DONT UNDERSTAND
WHY THE NEW ROLLERS WERE THE SAME AS THE OLD ROLLERS
EXCEPT FOR THE COST.

Parts Used:

Lower Dishrack Kit

JOHN from JUPITER, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

my old lower dishwasher rack was rusted out and some parts broken.

Snapped on the rollers, removed the center part from the old rack that sprays the water and snapped it on the new one. We then bent the back row down so it would acomodate my larger items. My old rack had that feature. You could either have the rack up or down. Now l
ooks beautiful and works perfectly.
Could have used some directions though.

Parts Used:

Lower Dishrack Kit

Kathy from ELGIN, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

throwed water out under the door

Did not use the new parts. After removing the spray arm, found a screw out of place. Put the seal ring back in place and the screw back in the hole. Machine works like new.

Parts Used: