Models > 65022ES

65022ES Husqvarna Lawn Mower - Overview

Models starting with 65022ES

Keep searches simple, eg. "belt" or "pump".
Wheel – Part Number: 532401274
Wheel
★★★★★
★★★★★
(1)
PartSelect #: PS9016096
Manufacturer #: 532401274
Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part.
$34.86
  In Stock
Blade, 22" – Part Number: 532406713
Blade, 22"
PartSelect #: PS9017810
Manufacturer #: 532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22...
$15.90
  In Stock
Cover, Dust, Wheel – Part Number: 581840401
Cover, Dust, Wheel
★★★★★
★★★★★
(3)
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
  In Stock
Bolt, Handle – Part Number: 532191574
Bolt, Handle
★★★★★
★★★★★
(1)
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.99
  In Stock
Rear Skirt – Part Number: 532413160
Rear Skirt
★★★★★
★★★★★
(1)
PartSelect #: PS9287254
Manufacturer #: 532413160
$13.69
  In Stock
Handle Knob – Part Number: 532185577
Handle Knob
PartSelect #: PS9020379
Manufacturer #: 532185577
$3.99
  In Stock
Pinion – Part Number: 532403849
Pinion
PartSelect #: PS9016131
Manufacturer #: 532403849
$6.21
  In Stock
E-Ring 7/16 – Part Number: 812000058
E-Ring 7/16
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$3.99
  In Stock
Nut, Hex, Flangelock – Part Number: 532409149
Nut, Hex, Flangelock
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$4.99
  In Stock
Solenoid – Part Number: 539101714
Solenoid
★★★★★
★★★★★
(1)
PartSelect #: PS9030575
Manufacturer #: 539101714
$27.40
  In Stock
Drive Control Cable – Part Number: 532194653
Drive Control Cable
★★★★★
★★★★★
(1)
PartSelect #: PS9016384
Manufacturer #: 532194653
$27.40
  In Stock
Hardened Washer – Part Number: 532851074
Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$4.99
  In Stock

Common Symptoms of models starting with 65022ES

[Viewing 1 of 1]
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Parts Used:
Wheel
  • Russ from ALTENBURG, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive cable broken
Remove the front drive cover and disconnect the old from the drive, hook the new drive cable to the drive, and connect new cable back to the handle. Reinstalled the drive cover, started unit, and test that the drive was working correctly.
Parts Used:
Drive Control Cable
  • Frank from AUSTIN, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!