My Orders
65022ES (2007-05) Husqvarna Lawn Mower - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$40.43
In Stock
Lawn Mower Wheel
Part #532401274
This is a genuine Husqvarna replacement part, sold individually. Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part. This part is compatible with the Husqvarna lawn mower models that are listed below.
$33.68
In Stock
Mower Blade (22-inch)
Part #532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22" long, made of black metal, is not part of a kit or assembly, and is sold individually.
If you hit a hard object, you may bend the blade,...Read more causing a vibration. You may also have problems with the grass being cut as the blade dulls over time. If the blade is bent, damaged, or worn, it needs to be replaced. You will need a socket set to complete this repair.
Customers rate this repair as Easy.
Read less
$8.98
In Stock
Lawn Mower Wheel Dust Cover
Part #581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.
Read less
$8.98
In Stock
Lawn Mower Handle Bolt
Part #532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly.
This part will need ...Read moreto be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair.
Customers rated this repair as Easy.
Read less
$17.55
In Stock
Lawn Mower Rear Skirt
Part #532413160
This genuine manufacturer sourced replacement part is designed for use with lawn mowers.It attached to the mower deck to protect your feet and legs from grass clippings and debris. It is made out of plastic and it is sold individually. Please note the brackets and hardware are sold separately.
$11.85
In Stock
Lawn Mower Handle Knob
Part #532185577
This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.
$8.98
In Stock
Lawn Mower Pinion
Part #532403849
It is a genuine OEM supplied item which is made for walk-behind lawn mowers. This is a high-quality replacement for a missing or a damaged pinion gear that helps to drive the mower's wheel. Unfortunately, over time due to friction, the teeth on the gear may wear out. If this happens it will no longer engage the wheel and the mower will no...Read moret move. To ensure the exact location and the correct installation of the new part, refer to the diagrams of your specific model. Note, one durable metal pinion is included. You will need a wrench set and pliers to remove the old pinion and secure the new one.
Read less
$6.72
In Stock
Lawn Mower Flangelock Hex Nut
Part #532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.
Read less
$37.74
In Stock
Drive Control Cable
Part #532194653
This replacement part is supplied directly from original equipment manufacturer for use with walk behind/push mowers. The drive control cable is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. This cable assembly consists of a...Read more metal wire cable with z-type bent ends, rubberized cover/body and a plastic clip. Replacing this cable is a simple task that may require pliers. • First you want to see where the old cable is attached • Just remove one cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Once both ends are attached, push the upper mount assembly of the old cable out of the hole in the upper handle • Tie the cable in place just as the old one was (make sure to leave enough clearance and free play to avoid over-bending and breaking the new cable)
Read less
$6.72
Special Order
Lawn Mower E-Ring
Part #812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.
$7.39
In Stock
Lawn Mower Drive Pawl
Part #532404845
This part has been sourced from the original manufacturer and is intended to be used with walk-behind lawnmowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The metal pawl is used to secure the pinion to the transmission axle to allow the two parts to rotate in unison. This drive pawl is priced as a single item, please note two may be needed.
$47.51
In Stock
Battery Charger (12V)
Part #597186301
Keep your equipment powered and ready with this authentic OEM 12V battery charger, specifically designed for use with Husqvarna and Poulan lawn mowers. Sourced directly from the original manufacturer, this charger ensures reliable performance and compatibility—unlike aftermarket alternatives.
Its primary function is to recharge the bat...Read moretery that powers your mower, helping maintain consistent starting power and overall functionality. Please note that using this charger with a weak or defective battery can cause damage to the charger itself. If you're unsure whether the issue lies with the battery or the charger, it's recommended to have the battery tested at a certified service center before replacing any components.
Each order includes one (1) 12V charger. This is a must-have replacement part for maintaining your mower’s electrical system and ensuring dependable operation throughout the season.
Read less
Common Symptoms of the 65022ES
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More