5KSM125SOB5 Whirlpool Mixer - Instructions

Pulled the Knob off of the new Lever then pressed it on the old Lever. I had to order the whole lever because it was the part nearest the knob in the illustrated parts break-down. I RECOMMEND THAT THE KNOB BE ADDED TO THE ILLUSTRATED PARTS BREAK-DOWN.

bought new wire whip for mixer, simple attachment.

I just traded the old beater for the new. It was just in time for cookie making.

I inherited an electric mixture from my mother-in-law after she died in 2004. The mixer must have been from the 70s. I guess I could buy a new one but I think of her each time I use it and it is almost like I keep a piece of her alive. The paint on the flat beater was chipping and instead of potentially poisoning my family I knew I needed to either replace the mixer or get a new Flat Beater. I had no idea, with the mixer being so old that a replacement part would even exist but it did! I purchased the replacement flat-beater and installed it in two seconds. Now I can use my mixer with immeasurable sentimental value and not pose any health risks to my family!

The Kitchenaide Artisan stand mixer was purchased as a floor model. The two white beaters had worn and chipped spots on them. I purchased two replacement beaters from Part Select. They arrived the next day in great shape. Have used the mixer several times since and it has worked wonderfully.

My kitchenaid mixer is at least 37 years old. Everything has worked fine after all these years except the screw cap was flimsy, still stainless steel, but not sturdy. So I tried to replace it , but was told it was too old and couldn't get the part. I contacted Part Select and found a screw cap from newer models fit perfectly and should outlast me and the mixer, it is a lot sturdier than original one. It also arrived in 2 days, which was fantastic. Thanks guys

you guys are great I ordered one day and the next day the wire whip was delivered!!!! Great job,thank you. Joanne

Looked up part replacement, ordered on line. Found part easily and waited anxiously for new part. I wanted to make cookies for the holiday season. Received part quickly, opened up packaging, put on mixer and I was back in business. Thanks so much for an easy fix. I also was pleasantly surprised at how cheap the replacement part was. Thank you, thank you for allowing me to get a new part with ease and continue to use my Kitchen Aid mixer.

remove the old screw and screwed the new part in place. I like your link because it shows a picture of the fixture and you can find the part you need real easy. Will order from you again when I need it.

My early '60's Kitchenaid K45 mixer screw cap/base plate would no longer hold the bowl, so I looked for another. This item, though not an exact replica of the original, fit and works great. The design is better by being more stout than the original. Pretty straightforward installation: remove three screws, take out old base plate, install new plate and screw down.

total replacement
works beautifully

all that were required, were you take off old beater an replace new.simple push up old part an replace new. as you do after usage of the machine.

put new paddle on

All I had to do was insert the new beater. Wonderful timing, was just going to start some holiday baking. will definetly use your website again. Thank you.

Insert and off you go. No real installation.