Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 4GWTW4740YQ0

4GWTW4740YQ0 Whirlpool Washer - Overview

Get Parts and Repair Help for 4GWTW4740YQ0

If you know the washer repair part you need, you can browse the list of all parts on the 4GWTW4740YQ0, or you can search by name or part description. You can also find your part by where it is located on the 4GWTW4740YQ0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for 4GWTW4740YQ0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for 4GWTW4740YQ0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.23

Drive Belt

The main drive belt is designed to ride on the pulley until the basket gets up to speed.

$2.96

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

$61.59

Suspension Rod Kit

This kit includes 4 suspension rods.

$32.23

Clutch Assembly

$24.96

Strike

$9.76

INLET HOSE

This hose can handle hot or cold water and is five feet long.

$2.96

Lid Hinge Mounting Screw

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

$5.59

Washer

This part goes on the agitator retaining bolt.

$4.89

D-Shaped Knob Insert

This insert is sold individually. Knob not included. Knob is sold separately.

$12.10

Drive Block - 2 5/16" High

This part is for large capacity belt drive and direct drive appliances.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Violent shacking in spin mode.

  • Customer: Terry from Homosassa, FL
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 98 of 125 people found this instruction helpful
Watched a video on the internet. read more

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 24 of 33 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

Noise on bottom of Washer louder as time went on. 1 1/2 years

  • Customer: Jerry from WALLA WALLA, WA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 14 of 19 people found this instruction helpful
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so yo... read more