Models > 41790862991

41790862991 Kenmore Washer Dryer Combo - Overview

Sections of the 41790862991

[Viewing 7 of 7]

Manuals & Care Guides for 41790862991

Click to download
Keep searches simple, eg. "belt" or "pump".
Upper Drum Glide – Part Number: 5303937139
Upper Drum Glide
★★★★★
★★★★★
(28)
PartSelect #: PS470317
Manufacturer #: 5303937139
The upper drum glide is attached to the front panel of your dryer, you can locate it by removing the top portion of your dryer. The drum glide allows the drum to rotate with ease and little sound. The...
$51.79
  In Stock
Order within the next 10 hrs and your part ships today!
Drum Support Bearing – Part Number: 131825900
Drum Support Bearing
★★★★★
★★★★★
(19)
PartSelect #: PS418807
Manufacturer #: 131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear by a bearing, which a...
$8.96
  In Stock
Order within the next 10 hrs and your part ships today!
Drive V-Belt – Part Number: 134511600
Drive V-Belt
★★★★★
★★★★★
(27)
PartSelect #: PS1146950
Manufacturer #: 134511600
This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer, your washer does no...
$25.92
  In Stock
Order within the next 10 hrs and your part ships today!
Dryer Lint Screen – Part Number: 5304516871
Dryer Lint Screen
★★★★★
★★★★★
(25)
PartSelect #: PS12585473
Manufacturer #: 5304516871
This dryer lint screen is for laundry centers. Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer. Follow the instructions in the owner's manual when installing this part.
$43.42
  On Order
Front Lower Drum Seal – Part Number: 5303283286
Front Lower Drum Seal
★★★★★
★★★★★
(3)
PartSelect #: PS460194
Manufacturer #: 5303283286
The front lower drum seal is used in the assembly of dryers. This seal helps keep your appliance running quietly. It allows the drum to smoothly rotate on the front panel. If you notice brown marks on...
$45.63
  In Stock
Order within the next 10 hrs and your part ships today!
Door Catch – Part Number: 131658800
Door Catch
★★★★★
★★★★★
(18)
PartSelect #: PS418433
Manufacturer #: 131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, which allows the door...
$58.17
  In Stock
Order within the next 10 hrs and your part ships today!
Multi-Rib Drum Belt – Part Number: 137292700
Multi-Rib Drum Belt
★★★★★
★★★★★
(12)
PartSelect #: PS3408299
Manufacturer #: 137292700
The multi-rib drum belt is also known as a drive belt and is a part for your dryer. The function of the drum belt is to attach to the motor pulley. It will then spin the drum as the motor rotates. Ove...
$20.15
  In Stock
Order within the next 10 hrs and your part ships today!
M Series Ignition Coil Kit – Part Number: 5303931775
M Series Ignition Coil Kit
★★★★★
★★★★★
(24)
PartSelect #: PS470049
Manufacturer #: 5303931775
This kit contains two coils, one is a two-wire secondary coil and the other is a three-wire booster coil. Both coils in the ignition coil kit should be used together in the clothes dryer. Some of the ...
$35.04
  In Stock
Order within the next 10 hrs and your part ships today!
Timer Knob – Part Number: 131873304
Timer Knob
★★★★★
★★★★★
(11)
PartSelect #: PS418916
Manufacturer #: 131873304
This knob accepts a D-shaped shaft.
$55.37
  In Stock
Order within the next 10 hrs and your part ships today!
Drain Pump - 120V 60  Hz. – Part Number: 137221600
Drain Pump - 120V 60 Hz.
★★★★★
★★★★★
(21)
PartSelect #: PS7783938
Manufacturer #: 137221600
This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, which includes a red fl...
$131.24
  In Stock
Order within the next 10 hrs and your part ships today!
Dryer Drum Bearing Bracket – Part Number: 131724301
Dryer Drum Bearing Bracket
★★★★★
★★★★★
(2)
PartSelect #: PS12579101
Manufacturer #: 131724301
This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing
$10.50
  In Stock
Order within the next 10 hrs and your part ships today!
Ball Hitch – Part Number: 131777700
Ball Hitch
★★★★★
★★★★★
(1)
PartSelect #: PS418736
Manufacturer #: 131777700
This ball hitch provides support to the drum located at the back wall of the dryer. This allows the drum to spin. The bearing may have gone bad and you might notice that the ball is cut off. The ball ...
$69.82
  In Stock
Order within the next 10 hrs and your part ships today!

Questions And Answers for 41790862991

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 41790862991

[Viewing 19 of 19]
Noisy
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Leaking
Fixed by
these parts
Show All
Will not drain
Fixed by
these parts
Show All
Will not agitate
Fixed by
these parts
Show All
Burning smell
Fixed by
these parts
Show All
Pumps but will not spin
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Will not stop filling with water
Fixed by
these parts
Show All
Timer will not advance
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
No hot or cold water
Fixed by
these parts
Show All
Will not fill with water
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Spins slowly
Fixed by
these parts
Show All
Not draining
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace broken drive belt
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub pulley by hand to run belt on,release tension on idler arm.replace front panel and lower top.WALAAH!!!! you are done.
Parts Used:
Drive V-Belt
  • rodney from fairfield bay, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
270 of 298 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum glide wore down and caused close to get stuck between drum and front panel.
Unpluged dryer. Removed the top of dryer by pushing in a retaining clip on both sides of the front lip with a screw driver. Remove the two screws on both sides of front panel. These screws are square head or phillips #2. Unplugged the wiring harness to front panel (make sure power has been disconnected). Support drum and lean front panel away from dryer body. Front panel will pull off of tabs at bottom. The old drum glide is fiberous and hard to remove. I removed most of it with the pliers, but had to carefully scrape the balance of the glide off with the wood chisel. The adhesive that comes with the repair part has an acetone base, so I used acetone (or you could use nail polish remover) to remove the old adhesive. Once the acetone has dried, I applied an 1/8" snaking bead of adhesive to the front panel. There is more adhesive in the tube than you need so do not use too much. Make sure that you get adhesive as close to the base of the lower seal as you can. Follow directions on adhesive tube and then attach the glide. I let it set up for about 30 seconds. Place the front panel back on the tabs of the dryer. Carefully lift the drum an fit it on the front panel and insert the two screws holding the panel to the base. Reconnect the wiring harness and make sure it is not in contact with the drum. Check to make sure that all of the electrical connectors on the timer are still in place. Reassemble the dryer. Reconnect power.
Parts Used:
Upper Drum Glide
  • William from Boise, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
181 of 248 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would't spin all water out or rinse out clothes
uplugged washer took front off washer 2 screws pryed up top pump was mounted with 2 screws and 2 wires took off found change in pump and the fins to pump worn off ordered part off line the wait for part was longer than the amount of time to fix problem and cost of part saved me about $25-35 if I was to buy local worth wait save money and fix problem washes like new spins and drains all water from tub.
Parts Used:
Drain Pump - 120V 60 Hz.
  • kenneth from willard, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
153 of 189 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!