402- - Overview
Models starting with 402-
Click on the best match to narrow your results.
- 402-046 (1987) MTD Tiller (Tiller)
- 402-084 (1987) MTD Tiller (Tiller)
- 402-132 (1985) MTD Tiller (Tiller)
- 402-145 (1985) MTD Tiller (Tiller)
- 402-192 (1985) MTD Tiller (Tiller)
- 402-196 (1985) MTD Tiller (Tiller)
- 402-4 Broil-Mate Grill
- 402-49032012 (0001) Samsung Washer (Samsung Washing Machine 402-49032012/0001)
- 402-7 Broil-Mate Grill
- 402-P (14215) Wilton Vise (Clamp)
- 402-SEP (15978) Wilton Vise (Clamp)
- 402-SF (14300) Wilton Vise (Clamp)
Keep searches simple, eg. "belt" or "pump".
Hex Head Bolt
PartSelect #: PS4205366
Manufacturer #: DC60-40137A
This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing...
$12.85
In Stock
Outer Seal Clamp
PartSelect #: PS4218211
Manufacturer #: DC97-04973B
This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made o...
$13.92
In Stock
Lawn Mower Ground Drive Belt
PartSelect #: PS9172714
Manufacturer #: 954-04032B
This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power f...
$32.55
In Stock
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.40
In Stock
Drain Pump
PartSelect #: PS4204640
Manufacturer #: DC31-00054D
Looking to brighten up your cooking area? This GE Light Bulb adds the perfect amount of light under your range hood, ensuring you can see clearly as you whip up your favorite dishes. When it's functio...
$53.20
In Stock
Bearing-king Pin
PartSelect #: PS9164778
Manufacturer #: 931-0374
The flange sleeve bearing, also known just as the bearing, is sold individually, and assists the tine shaft rotation on your tiller by reducing friction between the moving parts and securing their pos...
$10.49
In Stock
Fixer Tub Assembly
PartSelect #: PS16224595
Manufacturer #: DC97-14489R
Shipping bolts are installed through the back of the washing machine, and hold the wash tub and basket in place while your washer is being transported. The tub suspension holds the tub correctly in pl...
$54.24
In Stock
Cap-dust
PartSelect #: PS9173723
Manufacturer #: 931-0487
This OEM dust cap prevents dust from entering the shaft and surrounding area of your tiller. This part is black, sold individually, and made out of plastic. Due to damage from ongoing use, this part c...
$18.43
In Stock
Washer Bolt Assembly
PartSelect #: PS4217876
Manufacturer #: DC97-02412A
Assembly BOLT;SWF-P12,MOTOR/
$26.82
In Stock
Door Glass
PartSelect #: PS4210731
Manufacturer #: DC64-00504C
Explore the sturdiness and functionality of the Samsung Washer Door Glass. Fitting perfectly with a set of Samsung Washer models, it is a high-quality door glass, designed with an eye for detail by Sa...
$172.08
On Order
Common Symptoms of models starting with 402-
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The boot had a crack, where the leak was.
Took off the front part of boot on the door, continued to take out the front and top off to washer Faisal.
Removed weights and boot connected to the drum. Installed new boot and leeks was gone.
Removed weights and boot connected to the drum. Installed new boot and leeks was gone.
Parts Used:
-
Hilda from YONKERS, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water level was lower than normal.
First unplug or turn off thee circuit breaker. Then remove the two screws to the top cover. Slide the cover back about three inches then remove the cover. Next take out the screw to the old sensor. Then unplug the electrical connection by squeezing and the pulling to disengage. Now set the old unit aside. You then grad your eight inch wi
... Read more
re tie and hold the with flat side to the right and just to the right of the screw hole for the bracket is a square hole. Feed to wire tie into the square hole with your left hand then loop down left side of the end of new sensor and back up threw the square hole and tighten with the pliers. Your new sensor will be positioned just like it was mounted to the metal bracket. And pretty ridged. Now connect the vacuum hose and electrical connector.
Read less
Parts Used:
-
Fredric from ROCKMART, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Parts Used:
-
LISA M from BATESVILLE, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!