38624 Toro Snow Blower - Overview
Models starting with 38624
Click on the best match to narrow your results.
- 38624 (310000001-310999999 - 2010) Toro Snow Blower (Snowthrower)
- 38624 (290000001-290999999 - 2009) Toro Snow Blower (Snowthrower)
- 38624W Toro Snow Blower (Toro Snowblower Model 38624W Parts)
- 38624W (311000001-311999999) Toro Snow Blower (Toro Snowblower Model 38624W/SERIAL: 311000001-311999999 (38624W/SERIAL:311000001311999999, 38624W/SERIAL: 311000001 311999999) Parts)
- 38624W ( 312000001-312008458 2012 ) Toro Snow Blower (38624w, Power Max 826 Oxe Snowthrower, 2012 (Sn 312000001-312008458))
- 38624W ( 312008459-312999999 2012 ) Toro Snow Blower (38624w, Power Max 826 Oxe Snowthrower, 2012 (Sn 312008459-312999999))
Keep searches simple, eg. "belt" or "pump".
Nut-lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$6.25
In Stock
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$6.25
In Stock
Kit-needle/seat
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$8.70
In Stock
Pulley/spring Assembly
PartSelect #: PS8988822
Manufacturer #: 498144
Upgrade your equipment with this reliable Pulley/Spring Assembly from Briggs and Stratton. Known for their superior quality, Briggs and Stratton parts are designed to help prolong the life of your mac...
$24.95
In Stock
Connector-hose
PartSelect #: PS9074730
Manufacturer #: 692317
This is a Genuine Manufacturer Sourced replacement part used on a a variety of Engines. This is a Fuel Line Connector connects the fuel line to the carburetor. This part is made out of Plastic and Met...
$8.87
In Stock
Gasket-float Bowl
PartSelect #: PS9064482
Manufacturer #: 693981
This is a Genuine OEM Authorized Gasket used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recom...
$6.25
In Stock
Key-flywheel
PartSelect #: PS8925657
Manufacturer #: 222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
$6.25
In Stock
Plate-pawl Friction
PartSelect #: PS9074726
Manufacturer #: 692299
This is a genuine OEM sourced replacement part. It is designed for use with lawn and garden engines. It is an important part of the starter assembly that is used to crank start the unit. Please note s...
$6.25
In Stock
Fuel Tank
PartSelect #: PS9141053
Manufacturer #: 799863
This genuine fuel tank assembly is sourced directly from the original equipment manufacturer and is specifically designed for use with Briggs & Stratton engines on lawn and garden equipment. It serves...
$103.95
In Stock
Seal-oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$7.30
In Stock
Washer
PartSelect #: PS8832975
Manufacturer #: 107-3844
A washer is used for things such as load distribution, stability, alignment and protection for whatever equipment it is fastened between. This curved washer, also known as a wave washer or spring wash...
$6.25
In Stock
Float-carburetor
PartSelect #: PS8961149
Manufacturer #: 398187
This is a genuine OEM supplied replacement part designed for use with Briggs and Stratton engines. This float controls fuel flow into the carburetor bowl by adjusting the needle valve. Includes a plas...
$12.76
On Order
Exact Part matches for your search term
[Viewing 2 of 2]
DISCONTINUED
This part number matches the current model number 38624
PartSelect #: PS794428
Manufacturer #: 38624
No Longer Available
AR Spring
This part number matches the current model number 38624
PartSelect #: PS18286095
Manufacturer #: 38624
No Longer Available
Common Symptoms of models starting with 38624
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Cannot pull starter cord out or engine will not turn over
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
Parts Used:
-
Dana from HAMMOND, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
-
Alberto from PALMETTO BAY, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
11 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!