3624XPW Magic Chef Range - Instructions

Removed two screws and unpluged old element plugged in new element and re-attacheched to oven. No Problems at all.

Removed 2 screws, should have tripped breaker first but learned the hard way, unplug wires, install new.

Shut off electricity to appliance then unpluged wiring from old element and pluged in new element.

After finding out my 2nd hand electric stove was not reaching the temperature I needed to bake my cookies I knew I had to either find out what was wrong & repair it or purhcase another stove. The baking element was the culprit and it was really easy to fix. I disconnected the power line to the stove, unscrewed the old element & pulled apart the contacts from the wires. I then reversed the process and was done in less than 30 minutes. I was extremely pleased with how fast my order was shipped - I ordered the part on Tuesday & the part was waiting for me on Thursday when I got off from work. Will definitely order from PartSelect again!

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires attached to the element, reattached to new element and replaced screws. This was very easy, I was glad I did not call the repairman.

Pretty simple, except the element melted very close to one end, so the screw holding the element to the rear of the stove was partly melted also. Had to drill it out & used a nut & bolt to secure the new element.
Apart from that, it was a breeze. As others have done, I re-tightened the lugs that the element plugged into.
Suggest a "test heating" before using stove: mine had a strong odor on first use, fine afterwards

replaced burner element

Removed old element (two screws) unclipped two wires. Clipped the two wires to the new element (one at each end), reinserted new element, replaced the two screws. Done. Oh, flipped the circuit breaker back on:-)

unscrewed the old baking element, took the yellow wire off, and put the yellow wire onto the new baking element and screwed it back onto the oven. Took less than 15 minutes.

We repalced the heating element n no time. Easy to do and the price couldn't be beat!

Simple repair.Just make sure you measure the length of element from back wall to plug in,width,and width of holes in back of oven.Simple repair with correct measurements.Pluged it in replaced screws plugged power back to unit , worked like a charm....Thank You!!!

Removed back of stove (6 screws), puled clips loose. Two screws inside oven, pulled out old element. slid new one in, replaced screws, slid on clips replaced back panel. Don't forget to unplug the stove frist.

I watched the video provided by Part Select before I ordered the part. I removed the old element by taking out two screws and unplugging it from the wires. I put the new element in place, connected the wire to the right side and then opened up the back of the range to connect the left side. The repair was easy, but the video did not show that you had to connect the left side from the rear of the appliance. It was easy to figure out. The appliance works like a charm...no like an oven.

1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes

The previous repair stories were extremely helpful! The most difficult part was unhooking the old element and I assume some of that was contributed by it's age. Installing was a piece of cake!