All Installation Instructions for Kenmore Refrigerator 2537482240F

Broken Refrigerator Door Shelf Retainer Bar

We took off the broken bar and put on the new one. It clips on. Took about 10 seconds and could have been done by a 5 year old.

Parts Used:

Door Shelf Retainer Bar

Ward from Stockton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Crisper Pan

Just removed the broken pan and installed the new one within 2 minutes. Really simple

Parts Used:

Refrigerator Crisper Pan

Deepankar from Novi, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Ice maker was not making ice

I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAIT OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!

Parts Used:

Replacement Ice Maker

Jeffrey from Indianapolis, IN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Broken bar and seal

Snapped in the bars and with the seal once on the track went right on

Parts Used:

Door Shelf Retainer Bar

Mark from Sandwich, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

The Gasket was not holding tight and I replaced with a new one.

Just like you showed on you tube.

Parts Used:

Refrigerator Door Gasket

Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Ice maker failed

Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.

Parts Used:

Refrigerator Ice Maker Assembly

Mary from SOUTH LYON, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

broken rack on freezer door

just slipped the part in place

Parts Used:

Freezer Door Shelf Retainer Bar

Louis from St Augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Retainer bar broke

Removed bars from doors snapped in new replacements

Parts Used:

Door Shelf Retainer Bar

Kathy from Weyers Cave, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Cracked drawer

I slid out the old drawer and slid in the new drawer. Easy as that! I would recommend this website to anyone.

Parts Used:

Meat Pan

Jaime from Harrisburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Bottom retainer bar on door shelf broke

took replacement part out of box and slipped it right into placed. could not have been easier

Parts Used:

Door Shelf Retainer Bar

Elizabeth from Shelbyville, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Not running

After waiting over 2wks for my part to arrive, I purchased the part locally and made the repair the same day as I am still waiting for the part to arrive from you guys. Your customer service really needs improving. I paid for 2 day shipping, what a joke. I will be returning the part as soon as I receive it thanks.

Parts Used:

Cold Control Thermostat

Kenneth from SAVANNAH, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

ice maker quit making ice

I basically followed the instructions offered when i searched for the ice maker. It was relatively easy to do, I undid the 2 screws holding the ice maker to the side of the freezer, the was the tricky part, holding a mirror so i could see the slots of the screws. loosened them, disconnected the electrical connection and reversed the process for the install. It took about 25 minutes and i was back making ice.

Parts Used:

Replacement Ice Maker

Barry from Middletown, DE
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Lightning struct the house and fried the evap thermostat

Noticed the evap fan wasn't working, so trying to disconnect the wire broke the connection so had to order a new motor. Installed the motor but it still didn't work. Had a technician look at it and he said it was the control board. Ordered and installed control board and still didn't work. The only element left is the evap thermostat. Jumped the thermostat and it worked so ordered and installed a thermostat. It works now

Parts Used: