All Installation Instructions for Kenmore Refrigerator 25370504413

my ice maker stopped working

removed ice maker storage holder and then remove two philip screws and unplugged four pin connector. removed ice maker and installed new one . very easy to do

Parts Used:

Refrigerator Ice Maker Assembly

henry from alhambra, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Wrong size

I sent the rack back to the address on the invoice and never received a refund. I was never able to get through on the phone line to speak with someone or to leave a message.

Parts Used:

Freezer Shelf

Jean from GENOA CITY, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

I believe I didn't order all the parts for the shelf. I need the sides, because it's still not in. Also the handle came off the fridge door, there no way to put that on.

I needed the sides so it can stay on track. The freezer and ddor bars were no problem. I talking about the glass rack in refrigerator

Parts Used:

Shelf Trim - Rear

Front Shelf Trim

Phyllis from LAS VEGAS, NV
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator light stopped working

The bulb wasn't the issue so I was hopeful the switch was. utube helped me some, but figuring my model was different than any on utube. Got the switch in and plugged it back in. Moment of truth. Didn't light. Ugggh! Out $50 for switch plus $20 for nut driver set.

Parts Used:

Door Light Switch

Karla from UNION, MO
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Warm temp ingridge and freezer ice build up

Ice build up in ice maker line, in coils and ice frozen clogged air flow down to fridge.
Used hair dryer to melt ice -one hour, removed control box assembly and installed new less 20 minutes.

Parts Used:

Control Box Assembly

mary from ROSELLE, IL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Old gaskets were cracked. Not a good seal.

Pulled old gasket off. Then put new gaskets on starting on one corner and pressing in all around. Took 20 minutes.

Parts Used:

Refrigerator Door Gasket - White

Freezer Door Gasket - White

Katherine from MARRERO, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Ice maker broke again!

This refrigerator is less than 2 years old. I have had to replace the ice maker 2 times now. Cheap ass parts! Only one ice maker you can order so just be prepared to replace it yearly!

Parts Used:

Refrigerator Ice Maker Assembly

Jeff from PANAMA CITY, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Door switch was no longer making my light go on when door opened

I used the youtube you provided. It was pretty straight forward, but I had to make a trip to the hardware store for a bit (hex wrench) to remove the hex bolt head style screws. I was only expecting to need phillips or flathead. I managed to remove one with a set of pliers, and the brought that example to the store for size reference when buying the bit to fit my black and decker drill. The rest was easy.

Parts Used:

Door Light Switch

Susan from VIRGINIA BCH, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

refer door hinges were lost during the move in to our first home.

The center door hinge was still attached to the refridgerator so I only had to install the bottom and top hinges. I also moved the door handles to the other side so the doors open the "right" way. The hinges were just 2 bolts and 3 screws. Now, just if the repair man from our home warrentee company would show up to fix the refridgerator. It's blowing hot air!!!

Parts Used:

Lower Hinge Bracket

Single Washer

Lower Hinge Pin

Upper Hinge

edith from woodbridge, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

8 of 22 people found this instruction helpful.

Was this instruction helpful to you?

The Dairy door was cracked by an item in the refrigerator and broke into two pieces

This was not technical at all. The old door fell out and the replacement door snapped right into position. It was simple.

Parts Used:

Dairy Door - Clear

George from Pottsville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Ice maker stopped making ice

loosened 2 screws with 1/4 inch nut driver, disconnected electric connection lifted old ice maker out, replaced it with new one hooked up electric plug tightened 2 screws

Parts Used:

Refrigerator Ice Maker Assembly

Robert from POTTSTOWN, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Ice Maker not producing / Clicking / Off-cycle

We love our ice here. I seem to replace the ice makers one to two times a year. Generally the ice cycle gets off for some reason and it starts making loud popping/clicking noises (gear grinding). Its easy to replace. Simply loosen two screws holding the unit to inside of freezer and disconnecting the wiring harness. Unit slide up and out. Replacement is super easy (5 mins or less). Bam! Ice!

Parts Used:

Refrigerator Ice Maker Assembly