All Installation Instructions for Kenmore Refrigerator 25370502617

Door seal on refrigerator was bad had to change took longer to remove new seal from packaging than removing old seal and reinstalling new seal it was a perfect fit and perfectly packaged ready to Install

Opened refrigerator door removed old door seal by pulling door seal loose from door with fingers installed new seal by pressing new seal back in by hand took roughly 10 minutes to do only issue I had was with delivery my package was sent to the wrong house and was received 3 days late

Parts Used:

Refrigerator Door Gasket - White

John from DECATUR, AR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

14 of 14 people found this instruction helpful.

Was this instruction helpful to you?

FREEZER WAS COLD FRIDGE WARM

YOU TUBE VIDEO POINTED ME IN THE RIGHT DIRECTION. USED MULTI METER TO CHECK FOR VOLTAGE. NONE, REPLACED DEFROST HEATER. WORKS LIKE A CHARM, PART DELIVERED TO MY DOOR FOR LESS THAN $60.00, IN TWO DAYS FROM PARTSELECT. FIXED IT MYSELF FOR LESS THAN THE COST OF A SERVICE CALL.

Parts Used:

Defrost Heater

JEFF from OLIVET, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

15 of 18 people found this instruction helpful.

Was this instruction helpful to you?

rack door broke in half

Rack door slid into place easily. Repair required no tools and took maybe 20 seconds to install!
Very easy job!

Parts Used:

Door Shelf Retainer Bar

Lisa from Milwaukee, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

15 of 18 people found this instruction helpful.

Was this instruction helpful to you?

cracked bottom hinge

My 4 year old grandson used the frig door as a swing.The bottom hinge cracked, then the door wouldn't seal. I propped the door up with some books, removed the broken hinge (2 bolts) and replaced with the new part. Simple fix on the door, only time will fix the 4 year old!

Parts Used:

Lower Hinge Bracket

LEE from LEO, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

16 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Parts of the interior of the refrigerator were broken

All I did was take the old pieces out of the refrigerator, clean the glass and put in the new pieces. It was a simple solution and now my refrigerator is like new! AND, I didn't have to pay my appliance store for their repairman!

Parts Used:

Crisper Cover Frame - No Glass

Front Shelf Trim

Lois from Marathon, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

14 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Torn gasket

Replacing the gasket is easy, just remove the old gasket by pulling it out of its grove and push in the new gasket in place.

Parts Used:

Refrigerator Door Gasket - White

Bobby from GILBERT, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

10 of 10 people found this instruction helpful.

Was this instruction helpful to you?

No shelf in Freezer compartment though obvious slots provided.

Used model # of frigidaire on your web site... reviewed parts available... noticed shelves abailable... zoomed in to measure using crosshatch background... measured my freezer compartment... seemed doable... ordered shelf... receivednext day... attempted to slip in slots... had to grind off 3/16th inch on two legs... slipped in... Perfect!

Parts Used:

Freezer Shelf

Joe from Dallas, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Worn out gasket so air escaping

Pull off the gasket and replace by pushing into the grooves.

Parts Used:

Refrigerator Door Gasket - White

Freezer Door Gasket - White

Daniel from WASHINGTON, DC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Crisper Pan

Just removed the broken pan and installed the new one within 2 minutes. Really simple

Parts Used:

Refrigerator Crisper Pan

Deepankar from Novi, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Broken bar and seal

Snapped in the bars and with the seal once on the track went right on

Parts Used:

Door Shelf Retainer Bar

Mark from Sandwich, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Broken Refrigerator Door Shelf Retainer Bar

We took off the broken bar and put on the new one. It clips on. Took about 10 seconds and could have been done by a 5 year old.

Parts Used:

Door Shelf Retainer Bar

Ward from Stockton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Coming from the refrigerator, there was an intermittent "clicking noise", occurring about every 30 seconds. The frig. eventually failed .

I removed the back cover and removed the clip holding the compressor- run capacitor and start relay. I replaced these 2 components and clean the dust from the frig., and from the bottom of the floor. I replaced the back cover ; Loss about $300 worth of meat when when the frig. failed. Then I thought that, during these turbulent times, there are many which don't have a refrigerator or any meat to place in it, The refrigerator is "running" normal again.

Parts Used:

Run Capacitor - 120V

winifred from LOUISVILLE, KY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

11 of 16 people found this instruction helpful.

Was this instruction helpful to you?

The lining of the gaskets were falling apart and the freezer was defrosting

I ordered a freezer gasket/insulation lining; just pulled the old one out and put in pressed in the new one; solved the problem easily. Then the refrigerator gasket was falling apart. I was ready to buy a new refrigerator but then I got laid off from work. I ordered the 2nd gasket. It did not fit easily at all. My husband had to man-handle and stretch it; then it worked, as worked well ever since. Spent $250 instead of $1250+. Thanks. P.S. Could not find the year of the frig.

Parts Used: