All Installation Instructions for Kenmore Refrigerator 2536172201B

broken door rack

snapped old one out by hand and installed new one with ease been broken for year could not believe how easy it was

Parts Used:

Door Rack

Mike from Whitmore Lake, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Dog aet the diffuser wile i was cleening the frig

Take down the light assembley by removing the 4 one qurter inch screws, and install the diffuser where it belongs.

Parts Used:

Air Diffuser

Bottom Air Diffuser

Jesse from North Fort Myers, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Broken Door Rack

Snapped new door rack into place.

Parts Used:

Door Rack

Bert from Saint Augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Fan Blade had broke off

This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.

Parts Used:

Fan Blade

Linda from Cocoa, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Needed a replacement for a broken doo rack

Snapped right in place, no problems at all.

Parts Used:

Door Rack

Ron from Tiffin, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Replacing a freezer door rack

It was a perfect fit and snapped into place in seconds. No instructions were required.

Parts Used:

Door Rack Freezer

James M from Charlotte, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Blade was broken off of fan.

I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.

Parts Used:

Fan Blade

Wayne from Elkhart, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

light socket burned out

snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.

Parts Used:

Light Socket

Judith from Gambier, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken fan blade ,I forgot to unpluge before cleaning

I did it just like the video it was that easy! love this web site amazing!

Parts Used:

Fan Blade

Melissa from Anderson, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

A shelf in my daughter's refrigerator broke

I got the model number and because you offered diagrams I was able to order the correct replacement. The piece slid right in and I thought it was miraculous. It was so easy.

Parts Used:

Door Rack

Barbara from Park Ridge, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Freezer cold and frig warm

Replaced evap motor. Everything is strong and running like a champ. Partselect video examples were very helpful. Would order parts again on next problem. Thanks

Parts Used:

Defrost Thermostat

William from Miami, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

Was this instruction helpful to you?

Defrost Timer Stuck On Defrost (Again)

I went online to a you-tube video to assess the problem and watch the repair. Ordered the part on sunday before christmas and had it christmas eve! Easy 10 minute repair. Four screws held the cover on. Two screws held the timer. Unplugged the old timer an replaced. Put all the screws back and . . . . Done! Easiest repair I've ever done. Parts select did a great job, good price, very fast service! One happy customer!

Parts Used: