25344723104 Kenmore Refrigerator - Instructions

I order the part from partselect.com and snapped the shelf in. Only took two minutes.

Our repair was easy. No tools required. It was just popping it into place. I would like to say that we ordered our part and paid for regular dhipping and we recieved it the very next day! What great service! Thanks so much!!!

Two of my refrigerator door bins were broken and I had been using duct tape to hold them in place. I decided to look them up on PartSelect and was able to find exactly what I needed at a great cost. I ordered them and they came right away. I put them on the door needing no tooks and bingo, just like new! Imagine my heartache when one somehow broke. Well I contacted PartSelect and they sent me another one at no charge and in less than a week!!!

I aligned the right and left clips on the shelf with the tabs on the door and snapped the shelf in place.

It snapped right in place, less than 1 minute. Made he fridge much more uefull and way cheaper than buying a new fridge. I am gald that there are places that sell parts like this. THANKS. Also, shipping was extremely fast.

placed bin into the protruding plastic inplacement
and then just snapped it in its place.

Just snapped the piece in place. Fixed in less than 1 minute. The Lady on the phone was helpful in making sure I was selecting the right piece. Delivery was made in 2 days. I can't be more pleased. cw

I had to tap the screw holes with a 8/32 tap so that the screws would not bind.

It locks into place.

When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proceeded to instal motor and put refrigerator back together. It was simple.

Replaced fan. I ordered the fan and received it the following.(-:

I first noticed my ice cream getting soft. Then 2 days later the alarm went. I emptied the freezer, opened the panels and saw no frost. I saw that 99% of issues were resolved with a defrost timer and thermostat so I ordered those. I have to say the parts came quickly and they went in very easy. My freezer seems to be in the 1% category though. It's still not cooling even though I can measure the temperature at the front of the evaporator coil is cold but by the end of the coil it's almost room temperature. I think a repairman is called for.

fit right in no problem

Upluged power pulled freezer out from wall removed the two screws that holds the defrost timer unpluged defrost timer pluged new timer in mounted new timer back with the two screws pluged freezer back in and job was complete. Freezer working fine.

Remove the cover panel inside the freezer, remove and replace the fan motor (pull fan blades off old motor and push on the new one) and replace the cover.