224L (2009-06) Husqvarna Trimmer - Overview

Hello Jim, thank you for the question. We are providing you with the instructions that will help you replace the spring of the trigger. 1- Remove the wire and boot from the spark plug. 2- Unthread the screws holding the two halves of the throttle housing. 3- Use a small flat-head screwdriver to separate the two halves of the housing. 4- Now, insert the short end through the hole in the trigger with the hook facing the left side. 5- Realign the trigger on the mounting post and place the long end of the spring above the tension pin. 6- Snap the two halves of the housing together. 7- Rethread and tighten the screws to secure them. We hope this helps!