Part Location Diagram of 537011301 Husqvarna Spring
See part K-3 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Spring 537011301

 Fits your 224L!
$ 10.76
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 224L!
PartSelect Number PS9020732
Manufacturer Part Number 537011301
Manufactured by Husqvarna
Troubleshooting
This part works with the following products:
Hedge Trimmer, Trimmer, Edger, Brush Cutter.
This part works with the following products:
Husqvarna, Jonsered.
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jodie
July 6, 2021
Can you send me a diagram on how this part goes on my pole saw it came off and can’t get it back on
For model number 537011301
PartSelect logo
Hi Jodie, Thank you for your question. There is a diagram listed with the part on our website that you may reference on how to install the spring. Just under the photo of the spring, you will find 2 thumbnail photos. The second photo is the diagram. If you click on it, the diagram will come up for you. We hope this helps! Good luck with the repair!

Was this helpful?
Thank you for voting!
Charles
July 5, 2023
How does the throttle spring fit in the handle
For model number 123l
PartSelect logo
Hi Charles, thank you for getting in touch. You can fit the spring in the handle by inserting the short end of the spring through the hole in the trigger, making sure the hook is facing the left side, then aligning the trigger on the mounting post and placing the long end of the spring above the tension pin. We hope this helps!

Was this helpful?
Thank you for voting!
Charles
July 11, 2023
How does the spring 537011301. And trigger 503877903. And lever 50391811 go fit in the handle No hole in trigger
For model number 123l
PartSelect logo
Hello Charles, thank you for reaching out. We have found some relevant instructions for you to install the spring, trigger and lever. They may not be of the exact same model, but they will help you with the process. You may follow the following steps: use a torx bit to unthread the five screws holding the two halves of the throttle housing together. Leaving the clamp screw intact, use a small flat-head screwdriver to help separate the two halves of the housing. Use a spring clamp to secure the left side of the housing, then loosen the clamp screw so you can pull the upper drive shaft out. Now, detach the old trigger from the throttle cable. Install the new throttle trigger by first attaching the throttle cable. Now, insert the short end of the spring through the hole in the trigger, making sure the hook is facing the left side. Align the trigger on the mounting post and place the long end of the spring above the tension pin. Insert the upper drive shaft into the throttle housing until it fully locks into place. Thread the mounting screw to help align the shaft, then tighten the clamp screw. Unthread the mounting screw and remove the spring clamp. Lift off the old block out lever and install the new lockout lever by positioning it on the left side of the housing. Make sure the wires and throttle cable are secured, then realign the right side of the housing and snap the two halves of the housing together. Re-thread and tighten the screws to secure. We hope this solves your problem!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS9020732
Manufacturer Part Number: 537011301
Brand
Model Number
Description
Husqvarna
1062568-62
Trimmer - Husqvarna String Trimmer Model 1062568-62 (106256862, 1062568 62) Parts
Husqvarna
123C
Trimmer - Husqvarna String Trimmer Model 123C/2004-01 (123C/200401, 123C/2004 01) Parts
Husqvarna
123L
Trimmer - String Trimmer
Husqvarna
123LD
Trimmer - Husqvarna String Trimmer Model 123LD/2004-01 (123LD/200401, 123LD/2004 01) Parts
Husqvarna
223L
Brush Cutter - Brushcutter
Husqvarna
224L
Trimmer - Trimmer
Husqvarna
322C
Trimmer - Line Trimmer
Husqvarna
322E
Edger - Husqvarna Edger Model 322E/1999-10 (322E/199910, 322E/1999 10) Parts
Husqvarna
322L
Trimmer - Line Trimmer
Husqvarna
322R
Brush Cutter - Brushcutter
Husqvarna
323C
Trimmer - Husqvarna String Trimmer Model 323C/2002-01 (323C/200201, 323C/2002 01) Parts
Husqvarna
323E
Edger - Husqvarna Edger Model 323E Parts
Husqvarna
323EX
Trimmer - Trimmer
Husqvarna
323HE3
Hedge Trimmer - Hedge Trimmer
Husqvarna
323L
Hedge Trimmer - Lightweight Trimmer
Husqvarna
323LD
Trimmer - Husqvarna String Trimmer Model 323LD/2002-01 (323LD/200201, 323LD/2002 01) Parts
Husqvarna
323P
Pole Saw - 4 Saw Attachment
Husqvarna
323P4
Pole Saw - Pole Saw
Husqvarna
323R
Brush Cutter - Brushcutter
Husqvarna
323RJ
Brush Cutter - Brushcutter
Husqvarna
323RJX
Brush Cutter - 323 Rjx (2005-05)
Husqvarna
324
Leaf Blower / Vacuum - Blower
Husqvarna
324HDA55
Hedge Trimmer - 324 Hda55 X-Series (20053600001-Current)
Husqvarna
324HDA55X
Hedge Trimmer - Husqvarna Hedge Trimmer Model 324HDA55X/2004-05 (324HDA55X/200405, 324HDA55X/2004 05) Parts
Husqvarna
324HDA55X-SERIES
Trimmer - Hedge Trimmer
Husqvarna
324L
Trimmer - Trimmer
Husqvarna
324LDX
Trimmer - Husqvarna String Trimmer Model 324LDX/2004-05 (324LDX/200405, 324LDX/2004 05) Parts
Husqvarna
324LX
Trimmer - Husqvarna String Trimmer Model 324LX/2004-05 (324LX/200405, 324LX/2004 05) Parts
Husqvarna
325
Edger - Edger
Husqvarna
325C
Trimmer - 325 C/Cx (2002-01)
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service