Models > 1039887621 > Instructions

1039887621 Kenmore Range - Instructions

All Instructions for the 1039887621

Drawer guide

Used Phillips screw driver, installed guide, applied lubricant.

Parts Used:

Rear Drawer Glide

Lee from Grass Valley, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Clips needed to re attach heating element

Pulled out old with pliers. Twisted new clips in per instructions.

Parts Used:

Single Heating Element Support Clip

Dennis from Orlando, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Burned Out Broil Element

The repair went ok. I did have to take the back off the stove in order to get to the wire connectors. Needed an extra person to move the stove out of it's location. Just had to be careful.

Parts Used:

Broil Element - 3400W 240V

William from Eufaula, AL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

R had ight front control made loud noise when contacts opened.

This is twin oven range with controls at side of upper oven. Control panel was fastened with screws at top and bottom. Range has built-in hood at top which had to be disassembled to reach top screw. Once had access to top screw, eaisly removed control panel and replaced control. New control had identical connections as old control so only had to install it, break shaft to correct length, and use proper shaft adapter for knob. Remounted control panel and range worked perfectly. This would have been a very quick job except for having to deal with the built-in range hood.

Parts Used: