101919582 Kenmore Range - Overview
Sections of the 101919582
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
Refrigerator Thermostat Sensor Barrier
PartSelect #: PS11739216
Manufacturer #: WP2196003
The thermostat sensor barrier covers and insulates the temperature control thermostat capillary tube.
$9.62
In Stock
Ignitor
PartSelect #: PS11742507
Manufacturer #: WP4392003
This igniter can only be used in place of round style igniters. This part ignites the gas within the dryer.
No Longer Available
Timer
PartSelect #: PS1760679
Manufacturer #: Y305020
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
No Longer Available
Questions And Answers for 101919582
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The timer would not shut off the dryer.
I Unplugged the dryer from the electrical outlet. Then took off the top panel. Then removed the nut holding on the selector dial, and removed the selector dial. I then removed the two screws holding the timer to the panel. Then I removed and installed each electrical connector from the defective timer, installing it on the new timer. Then
... Read more
reverse procedure to assemble the dryer.
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
Read less
Parts Used:
-
Val from La Habra, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
9 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no ignition, igniter not glowing, electricity good
easy even for an old man. Simply removed igniter bracket inside access door on the front and installed new part. Flex drive nut driver and 1/4" socket was all that was needed. Saved me a lot of money and time without the 25 year old dryer.
Parts Used:
-
gary from MANASQUAN, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!