My Orders
101919582 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The timer would not shut off the dryer.
9 of 15 people
found this instruction helpful.
-
Val from La Habra, CA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I Unplugged the dryer from the electrical outlet. Then took off the top panel. Then removed the nut holding on the selector dial, and removed the selector dial. I then removed the two screws holding the timer to the panel. Then I removed and installed each electrical connector from the defective timer, installing it on the new timer. Then
... Read more
reverse procedure to assemble the dryer.
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
Read less
Was this helpful?
Thank you for voting!
no ignition, igniter not glowing, electricity good
2 of 2 people
found this instruction helpful.
-
gary from MANASQUAN, NJ
- Really Easy
- 30 - 60 mins
-
Nutdriver
easy even for an old man. Simply removed igniter bracket inside access door on the front and installed new part. Flex drive nut driver and 1/4" socket was all that was needed. Saved me a lot of money and time without the 25 year old dryer.
Was this helpful?
Thank you for voting!