MTD Lawn Mower Bearings

Your Price

$7.50

PartSelect Number PS9416292

Manufacturer Part Number 741-04124

Genuine Manufacturer Approved replacement part designed for Riding Lawn Tractors and it has several applications. This Flange is made out of Metal and it is Sold Individually. One side is Flat like a washer and the other side is Hexagon shaped. Requires a Wrench to tighten or loosen.

Your Price

$6.40

MTD Lawn Mower Flange Bearing

PartSelect Number PS9122043

Manufacturer Part Number 741-0660A

This OEM-manufactured flange bearing supports and enables the smooth rotation of parts in your lawn equipment, such as the blade assembly, axle assembly, or steering components. This bearing has an inner diameter of .76 inches, an outer diameter of .941 inches, and a width of 1 inch. It is made of plastic. A similar similar style flange bearing can be used at the bottom of the crank, but it would be made of metal. When the bearing is broken, you may notice signs of wear and abnormal squealing noises coming from your machine. If neglected, the parts the bearing is supporting can overheat and potentially seize up. To switch out a flange bearing, you need to take off any bolts, screws, or clips that are holding it in place. Using a hammer or a bearing puller tool, gently push the bearing out of its housing. Since this part is sold individually, remember to refer to your user manual to understand how many bearings your machine will need. It is strongly recommended that you replace all the bearings in one go, as they wear out at the same rate.

Your Price

$6.92

MTD Lawn Mower Flange Bushing

PartSelect Number PS16421956

Manufacturer Part Number 741-0493C

This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is made of high-quality material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement procedure. You may need a screwdriver and a wrench set to take apart and reassemble the equipment when performing this repair.

Your Price

$6.40

MTD Lawn Mower Hex Flange Bearing

PartSelect Number PS9311603

Manufacturer Part Number 941-0656A

Installation Instructions

Patrick from Northville, NY

Yardman / MTD wouldn't steer left, makes a popping and grinding noise when turning.

To disconnect the steering shaft to replace the bearing, there is a #3 Philips head screw on the underside of the deck which needs to be taken out. Chances are it hasn't been replaced before, so it is likely very tight. I ended up dropping the deck to allow for more room but it could probably be done with the deck in place the way I had to do it. I had someone hold the steering wheel up top (not undoing the 13mm bolt holding the steering wheel in) and tried to unscrew the Philips, even after heating it with a torch still stripped out. The only way I could get the screw out was to take a pair of Vice Grips adjusted extremely tight to the outside of the screw and put the torch on it to heat it again. Then, turn the steering wheel to the left and when the Vice Grips get caught on the bottom of the mower, it will unthread the steering wheel from the screw. After the screw and washer are out *TAKE NOTE OF THE ORIENTATION OF THE WASHER*, I went to the hardware store and replaced the screw with a bolt that was 5/16 - 18 x .750 which was the closest length they had, took out the worn out bearing, popped in the new one, reinstalled the washer and bolt, then the deck. Even if you get the philips screw out without using Vice Grips, I would still recommend replacing it with a bolt. Read more...

Your Price

$10.36

MTD Lawn Mower Bearing Asm-sphere

PartSelect Number PS9311566

Manufacturer Part Number 941-00019

It is a genuine manufacturer-sourced item that is supplied by the original equipment manufacturer for use with DeWALT power tools. This is an identical replacement for a missing or damaged bearing assembly that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

Your Price

$7.19

MTD Lawn Mower Bearing:flg:hex

PartSelect Number PS19274005

Manufacturer Part Number 741-04136B

This is a an authentic OEM approved replacement hex flange bearing designed for use with walk behind mowers. This part helps to secure the front axle shaft to the deck. This flange bearing is made out of plastic.

Installation Instructions

Phil from SAINT CHARLES, MO

wheels falling down

lift mower up on angle, sip beer. took the cotter pin out of both sides. Finished beer. try to figure out how they go on, opened another beer. Figured it out, put cotter pin back on lowered the mower, drank on the new beer. Wheels adjusted just fine.. Thanks... Read more...

Your Price

$8.66

MTD Lawn Mower Bearing:flange

PartSelect Number PS9112939

Manufacturer Part Number 741-0516B

This is a genuine replacement part produced by original manufacturer. It is used in various tractors from MTD, Yard Machines, Bolens, and Yard Man. Flange bearings facilitate spinning axles/shafts and reduce friction. They are a very high wear item that may require replacement often. Sold individually.

Your Price

$13.92

MTD Lawn Mower Snow Blower Hex Flange Bearing

PartSelect Number PS9178250

Manufacturer Part Number 941-0245

Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature multiple of these bearings, so refer to any diagrams for your model to determine whether you will need one, or more. This is an OEM part that is sold as an individual item and has a 0.75-inch inner-diameter, 1-inch outer-diameter, and 1-inch height.

Your Price

$32.57

MTD Lawn Mower Ball Bearing

PartSelect Number PS9167899

Manufacturer Part Number 941-0600

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part diagram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

Your Price

$10.54

MTD Lawn Mower Plastic Flange Bearing

★★★★★

1 Review

PartSelect Number PS9302372

Manufacturer Part Number 741-0487C

Made of durable silver plastic, this Flange Bearing is an authentic manufacturer-source replacement part for hundreds of models of lawn and garden equipment. It is used to allow a shaft to connect while moving smoothly and freely and is sold individually. When this part malfunctions, you may notice the shaft becomes very sloppy or comes disconnected. To complete this repair, you will need a screwdriver, a socket set, and pliers. Customers rate this repair as Medium difficulty.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Popular MTD Lawn Mower Bearings

Related MTD Lawn Mower Parts

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

MTD Lawn Mower Bearings

Find Your Part

Popular MTD Lawn Mower Bearings

Related MTD Lawn Mower Parts