Kelvinator Dishwasher Dispensers

Videos!

Your Price

$69.91

Kelvinator Dishwasher Detergent Dispenser

★★★★★

8 Reviews

PartSelect Number PS11770487

Manufacturer Part Number 5304506521

This is the replacement detergent dispenser for your refrigerator. It is gray in color and is sold individually. It is approximately 8.5 inches long and 3 inches wide. The detergent dispenser stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. This is an OEM part sourced directly from the manufacturer.

Fixes these symptoms

Door latch failure
Leaking
Not cleaning dishes properly
See more...

Installation Instructions

Bernard from ACUSHNET, MA

The soap dispenser didn’t dispense the soap

After shutting off power to the dishwasher, I removed the two screws holding the door cover on the inside of the door sides, about 8 inches from the bottom of the door. I slid the cover down and off, and unplugged the wires to the dispenser. Then I removed the six screws holding the dispenser in place, removed the old dispenser, installed the new one, replaced the six screws and plugged the wires back in. The door cover and the two screws was all that was left. It took about ten minutes. Easy. Read more...

Videos!

Your Price

$62.60

Kelvinator Dishwasher Detergent And Rinse Dispenser With Cap

★★★★★

12 Reviews

PartSelect Number PS1524979

Manufacturer Part Number 154574401

This detergent and rinse dispenser with cap may also be known as the dishwasher dispenser assembly and is a part for your dishwasher. The function of this part is to attach to the inside door panel of your dishwasher and hold the dishwasher detergent and rinse in a closed compartment. The manufacturer has redesigned this part and although it may appear different than the original, it will have the same functionality, which is to release the detergent and rinse aid into the dishwasher. To complete this installation, you will need a Phillips screwdriver, and a pair of needle-nose pliers.

Fixes these symptoms

Door latch failure
Door won’t close
Not cleaning dishes properly
See more...

Installation Instructions

Teresa from Phoenix, AZ

Latch on detergent dispenser was broken

Reading the instructions posted, I realized that I only needed to remove the two lower screws on the inside of the dishwasher door. The lower front panel then came off easily. I unplugged the power to the dishwasher. I then removed the six screws holding the dispenser in place, and when loose I unplugged the two wires (I used a flat blade screwdrive to pry them a bit then they slid off -- note the red one was inside, lighter one outside). I put the new part in, put in all but the left screw with the hook. I then plugged the wires in, and fastened the left screw with the hook positioned around the wires. I put the panel back on, fastenet the two screws that hold it in, and plugged the dishwasher back in. It's working beautifully. All in all it was about 20 minutes. Read more...