Jenn-Air Wall Oven Circuit Boards and Touch Pads
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Jenn-Air Wall Oven Circuit Boards and Touch Pads
Your Price
$294.26
In Stock
Jenn-Air Wall Oven Electric Control Board
PartSelect Number PS12348595
Manufacturer Part Number W11179310
Experience the ideal solution for your Whirlpool wall oven with our state-of-the-art electronic control board. This genuine OEM Whirlpool part is designed to flawlessly manage all oven functions, including adjusting temperatures and controlling heating. Highly compatible, it works with select models of renowned brands like Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. Be certain to make correct oven model verification before placing an order. Installation is simple but please ensure power safety measures are adhered to halting the house circuit or unplugging the oven and don the proper safety gear. The efficient design of this control board guarantees a seamless fit and an optimal performance.
Your Price
$318.69
In Stock
Jenn-Air Wall Oven Electronic Clock Control Board
Next, I removed the knobs from the front of the display panel.
Then I removed the 4 phillip head screws that were located (1 each) behind the knobs.
Finally, I removed the 4 hex head screws from the bottom of the front panel.
You caan then remove the panel a few inches and remove the two cable connectors.
The trick part is to get the flat ribbin cable disconnected. If you squeeze the two small tabs (one on each end of the connector), the connector moves up and spreads open to CAREFULLY remove the ribbon cable.
The clock assembly has just two hex head screws holding it in place. Remove them, and reassemble everything in reverse.
If you did everything correctly, you should have a very bright stove clock again! Read more...
PartSelect Number PS11743858
Manufacturer Part Number WP71001799
This oven control board and clock is for ranges.
Oven control board and clock monitors the oven temperature and controls the oven heating functions in the range, and includes the digital display for the time and temperature settings.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Little to no heat when baking
- Timer will not advance
- Touchpad does not respond
- See more...
Installation Instructions
John from Kuna, ID
Lost all clock and timer display
Removed the 4 phillip head screws that hold the trim plate on the bottom of the display panel (and you probably could skip this step).Next, I removed the knobs from the front of the display panel.
Then I removed the 4 phillip head screws that were located (1 each) behind the knobs.
Finally, I removed the 4 hex head screws from the bottom of the front panel.
You caan then remove the panel a few inches and remove the two cable connectors.
The trick part is to get the flat ribbin cable disconnected. If you squeeze the two small tabs (one on each end of the connector), the connector moves up and spreads open to CAREFULLY remove the ribbon cable.
The clock assembly has just two hex head screws holding it in place. Remove them, and reassemble everything in reverse.
If you did everything correctly, you should have a very bright stove clock again! Read more...
Your Price
$294.76
In Stock
Jenn-Air Wall Oven Electronic Clock Control Board
2. Opened oven door used a phillips screwdriver to remove four black screws from under the top panel.
3. Lifted panel slightly & removed from oven.
Removed four screws using 1/4" nut driver to remove old display unit. Disconnected three wire harnesses.
4. Connected three wire harnesses to new display unit & replaced four nut screws.
5. Hang the top panel on the top of oven & replace four screws removed in step 2.
6. Turn on the circuit breaker for the oven.
("Very easy! I'm a 63 yr. old woman!) Read more...
PartSelect Number PS11743900
Manufacturer Part Number WP71003424
This electronic clock assembly is seven and a half inches long. It is three inches wide and is intended for use with a range's control panel.
Fixes these symptoms
- Touchpad does not respond
- Will not program
- See more...
Installation Instructions
Cheryl from Mesa, AZ
No clock display
1. Turned off the circuit breaker for the oven.2. Opened oven door used a phillips screwdriver to remove four black screws from under the top panel.
3. Lifted panel slightly & removed from oven.
Removed four screws using 1/4" nut driver to remove old display unit. Disconnected three wire harnesses.
4. Connected three wire harnesses to new display unit & replaced four nut screws.
5. Hang the top panel on the top of oven & replace four screws removed in step 2.
6. Turn on the circuit breaker for the oven.
("Very easy! I'm a 63 yr. old woman!) Read more...
Your Price
$318.71
In Stock
Jenn-Air Wall Oven Electronic Clock Assembly
After examining the old board I discovered that the 470 microfarad aluminum electrolytic capacitor (in the corner) was badly deformed. I replaced this. Now I have a spare board. I believe that the failure (common in Jenn-Air ovens) starts with a transient on the power line (it did with mine). This damages the capacitor which progressively gets worse. This capacitor probably acts as a low pass filter on the power supply for the display. If any of you are into electronics, I would suggest wiring a zener diode across the capacitor to suppress transients. I wish the Jenn-Air engineers had put this in the design. It would have avoided a lot of costly repairs and saved them the bad reputation that they have as a result of this board failing over and over again. Read more...
PartSelect Number PS11743864
Manufacturer Part Number WP71001872
This part controls the functions of your oven such as bake, broil, timed bake and the clock.
Fixes these symptoms
- Touchpad does not respond
- Will not program
- See more...
Installation Instructions
Gregory from Ann Arbor, MI
Dim display
This is a Jenn-Air double oven. Turned off circuit breaker to the oven. Removed 7 screws that hold the top panel in place. Removed 3 cable/connectors from the clock module so panel can be removed from oven and placed on a table. Unscrew 4 hex head screws attaching clock module to front panel. Press on two tabs and remove circuit board from plastic frame. Replace with new board reversing dis-assembly sequence.After examining the old board I discovered that the 470 microfarad aluminum electrolytic capacitor (in the corner) was badly deformed. I replaced this. Now I have a spare board. I believe that the failure (common in Jenn-Air ovens) starts with a transient on the power line (it did with mine). This damages the capacitor which progressively gets worse. This capacitor probably acts as a low pass filter on the power supply for the display. If any of you are into electronics, I would suggest wiring a zener diode across the capacitor to suppress transients. I wish the Jenn-Air engineers had put this in the design. It would have avoided a lot of costly repairs and saved them the bad reputation that they have as a result of this board failing over and over again. Read more...
Your Price
$883.54
In Stock
Jenn-Air Wall Oven Touchpad Control Panel Assembly Stainless
PartSelect Number PS12578737
Manufacturer Part Number W11236887
Introducing the Genuine OEM Touchpad Control Panel Assembly from Whirlpool. This crucial element, made of stainless steel, is designed to seamlessly integrate within your appliance. Being a genuine part, it is compatible with select models from not only Whirlpool but also KitchenAid, Maytag, Jenn-Air, Amana, and Inglis. Kindly ensure to verify your model compatibility before placing your order, as slight variations in size and shape can occur. Trust the Whirlpool Touchpad Control Panel Assembly to bring durability, precision, and performance to your appliance experience. Get yours today, and keep your appliance working in perfect order.
Your Price
$241.12
In Stock
Your Price
$318.71
In Stock
Jenn-Air Wall Oven Range Electronic Clock Control Board
Remove the four screws holding the clock display and replace with new part. Reassmble. Ahhh lights. Pray that you new unit doesn't burn out in four years. The end. Read more...
PartSelect Number PS11743899
Manufacturer Part Number WP71003401
This electronic clock assembly is seven and a half inches long. It is three inches wide and is intended for use with a range's control panel.
Installation Instructions
Rollin from Petaluma, CA
Dim clock and oven display lights
Turn off power to oven. open top oven door and remove the four screws holding the display unit in place. Pull out on the bottom and lift up. Disconnect the wires and lay unit on counter.Remove the four screws holding the clock display and replace with new part. Reassmble. Ahhh lights. Pray that you new unit doesn't burn out in four years. The end. Read more...
Your Price
$198.30
In Stock
Jenn-Air Wall Oven Touchpad And Control Panel Assembly - Black
PartSelect Number PS2357932
Manufacturer Part Number 5765M451-60
Emphasize the functionality and authenticity of your appliance with the Whirlpool Touchpad and Control Panel Assembly in elegant black. This genuine OEM part ensures compatibility with certain models from Whirlpool along with KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. Please verify the correct size and shape before ordering, as parts can have slightly differing variations. As an OEM part, it guarantees quality and reliability for your appliance. Whether you're replacing a damaged piece or upgrading your appliance, this control panel assembly offers an assured fit and function. Trust in Whirlpool, a renowned brand in kitchen appliances, for this essential component.
Installation Instructions
Stephen from Corpus Christi, TX
Oven door would not close properly. Believe this caused control panel to fail from overheating.
Parts arrived as scheduled with no problems. First I removed and repaced the 2 oven door hinges to see if this would fix the problem with the door not closing all the way (had to push door to get the oven light to go out). Since no instructions were shipped with the new hinges, I followed the information given by other customers on how they were able to change the hinges. Changing the hinges DID NOT fix the problem with the door! The new hinges did not pull the door any tighter than the old hinges. Door closure problem finally fixed by supergluing several round mangnets (Lowes) to the door which pulls the door tight when closed. I learned this trick from another customer's report (thanks for the idea!). Next I removed and replaced the failed control panel. This was the second panel to fail on this oven in the 5 years it has been installed! The first panel was replaced under warranty after approx 2 years of use. Hopefully, the magnets will keep the oven door closed and prevent overheating of the control panel which will allow this poorly designed oven to last a little longer this time!
Read more...
Your Price
$1200.49
On Order
Jenn-Air Wall Oven Panl-cntrl
PartSelect Number PS12578680
Manufacturer Part Number W11232121
This electronic control panel serves as the user interface for select wall ovens and ranges, allowing you to set temperatures, timers, and cooking modes with precision. Designed for compatibility with various Whirlpool, KitchenAid, and other branded appliances, it features a digital display and responsive buttons for smooth operation. If your current panel is malfunctioning or unresponsive, this replacement restores full functionality. Always verify your appliance’s model number before purchasing to ensure proper fit.
Your Price
$289.12
In Stock
Jenn-Air Wall Oven Control Panel And Touchpad - Black
PartSelect Number PS11742978
Manufacturer Part Number WP5766M099-60
The Whirlpool Control Panel and Touchpad is a genuine OEM part that is designed to deliver top-notch performance and is compatible with select models of KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. This control panel and touchpad, featuring a sleek black finish, is crafted to perfection, ensuring it integrates seamlessly into your appliance and improves its functionality. Please remember to double-check its compatibility with your appliance model before ordering as there may be slight size and shape variations between similar-looking parts.
Installation Instructions
Anna Marie from El Paso, TX
Only the clock, broiler and cancel button on the control panel were working
My 11 year old son removed the screws that held the panel in place. I switched out the control board by removing the screws that held it in place, then I connected the new printed connectors on to the control board and replaced the screws that held the control panel in place and that was it. It took about five minutes and the best part was I didn't have to pay $200.00+ in labor that I was quoted by a service technician.
Read more...
Related Jenn-Air Wall Oven Parts
- Jenn-Air Wall Oven Brackets and Flanges
- Jenn-Air Wall Oven Doors
- Jenn-Air Wall Oven Ducts and Vents
- Jenn-Air Wall Oven Elements and Burners
- Jenn-Air Wall Oven Fuses
- Jenn-Air Wall Oven Handles
- Jenn-Air Wall Oven Hardware
- Jenn-Air Wall Oven Hinges
- Jenn-Air Wall Oven Insulations
- Jenn-Air Wall Oven Lights and Bulbs
- Jenn-Air Wall Oven Racks
- Jenn-Air Wall Oven Seals and Gaskets
- Jenn-Air Wall Oven Sensors
- Jenn-Air Wall Oven Trims
- Jenn-Air Wall Oven Wire Plugs and Connectors