Husqvarna Trimmer Engines
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husqvarna Trimmer Engines
Your Price
$6.95
In Stock
Husqvarna Trimmer Piston Ring
PartSelect Number PS16365562
Manufacturer Part Number 545154009
This OEM Piston Ring is used to provide a seal between the piston and cylinder wall. It attaches around the piston, inside the groove. It will require a screwdriver, allen wrench, torx wrench and socket set and is rated as "Hard" to install. The part is silver, metal, and individually sold. If broken due to general wear/fatigue you will have poor compression within the cylinder, causing a loss of power. If broken, damaged or worn, the part should be replaced. Refer to your make, model, and diagram to ensure this is the correct part.
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$60.24
In Stock
Husqvarna Trimmer Piston Cylinder Assembly Kitinder Kit
PartSelect Number PS9030152
Manufacturer Part Number 545008082
This is a genuine OEM replacement part used with several lawn trimmer devices. The piston/cylinder kit is composed of metal and plastic, and is fitted between the crankshaft assembly and the gasket foam kit. It is recommended to refer to engine manual and diagrams for further instruction. The piston/cylinder kit is sold individually. To complete the repair, you will need a screwdriver, pair of pliers and a socket set.
Installation Instructions
David from ENID, OK
Unit was defective when bought
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.
Read more...
Your Price
$9.62
In Stock
Husqvarna Trimmer Piston Ring
PartSelect Number PS9981233
Manufacturer Part Number 575227901
This genuine manufacturer sourced replacement part is specially made for use with a variety of handheld lawn and garden equipment. This part is installed on top of the piston/connecting rod. Its purpose is to create a seal in the cylinder so that it can build pressure. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, causing low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Includes one (1) metal piston ring. Tools Required: Receptacle for draining fuel, Torx wrenches, spark plug wrench, 10mm wrench (or adjustable), long-nosed pliers, rubber mallet, standard screwdriver, old starter rope (or similar cord), adjustable pliers, 2-cycle engine oil, razor blade, ignition gapping gauge. • Remove the air cleaner • Drain the fuel • Remove the air cleaner case • Remove the carburetor • Remove the intake insulator • Remove the spark plug • Remove the engine cover • Remove the insulator gasket • Remove the starter assembly • Remove the fuel tank • Remove the air duct • Separate the engine • Bind the engine • Remove the clutch • Remove the flywheel • Remove the starter pulley • Unbind the engine • Remove the muffler • Separate the cylinder from the crankcase • Remove the piston ring • Install the piston ring
Your Price
$6.95
Special Order
Husqvarna Trimmer Piston Ring
PartSelect Number PS16365561
Manufacturer Part Number 545154001
This metal ring in your engine, known as the piston ring, seals the gap between the piston and cylinder wall. It makes sure that the gases produced during combustion do not escape and that the engine maintains the pressure it needs to run. If the piston ring is damaged, oil can seep into the combustion chamber, causing your engine to exhibit rough idling and your machine emit blue smoke. To switch out a defective piston ring, detach the old ring from the piston with a screwdriver. When installing the new ring, you may need to compress it to make it fit properly. Please be aware that this genuine OEM replacement part is bought individually. It is recommended that you replace all the piston rings in your machine at once, as they tend to wear down at the same rate. Carefully review your user manual to determine how many rings your machine needs before placing your order.
Your Price
$49.45
In Stock
Husqvarna Trimmer Kit - Piston
PartSelect Number PS9036720
Manufacturer Part Number 545081814
This piston kit is a genuine OEM replacement designed for small 2-stroke engine equipment. It includes the components needed to restore proper compression and dependable engine performance during a top-end rebuild. Manufactured for precise fit and durability, it’s an ideal replacement when worn pistons or rings cause power loss, hard starting, or reduced efficiency.
Your Price
$14.25
In Stock
Husqvarna Trimmer Piston Assembly
PartSelect Number PS11822513
Manufacturer Part Number 510223602
This piston assembly is a genuine OEM replacement designed for select 2-stroke outdoor power equipment. It restores proper engine compression and supports smooth, efficient combustion, helping bring back lost power and reliable performance. Manufactured with durable, high-quality materials for a precise fit, it’s an ideal replacement when worn piston components cause hard starting, reduced power, or poor engine operation.
Your Price
$7.65
In Stock
Husqvarna Trimmer Ring- Piston
PartSelect Number PS9004320
Manufacturer Part Number 530029805
This is a genuine replacement part manufactured for use with chainsaws, and other outdoor power equipment. The piston ring forms a seal between the cylinder and piston. This seal separates the combustion chamber, and the crankcase. A worn or broken piston ring will break the seal resulting in a loss of compression. The piston ring is sold individually.
Your Price
$51.23
In Stock
Husqvarna Trimmer Jackshaft
PartSelect Number PS9014036
Manufacturer Part Number 532172520
This is an authentic OEM part four use with Husqvarna, Poulan, Weed Eater Trimmers. The shaft rotates the cutting head on the line trimmer. The most common reason for replacing the shaft is if it is damaged or if the trimmer head will not rotate. This part is sold individually. The tools that you will need to replace the shaft are a T-25 Torx head screwdriver and a 7/16 inch wrench.
Your Price
$6.95
In Stock
No Longer Available
Husqvarna Trimmer Cylinder Head
PartSelect Number PS12636608
Manufacturer Part Number 530012541
This is an original replacement part manufactured for outdoor power equipment. The cylinder is used to house the piston and spark plug and is used to provide a combustion chamber to ignite the air-fuel mixture. This cylinder is available as an individual replacement part, please see model diagram for associative parts.
Related Husqvarna Trimmer Parts
- Husqvarna Trimmer Bearings
- Husqvarna Trimmer Blades
- Husqvarna Trimmer Brackets and Flanges
- Husqvarna Trimmer Caps and Lids
- Husqvarna Trimmer Carburetors
- Husqvarna Trimmer Control Cables
- Husqvarna Trimmer Exhausts
- Husqvarna Trimmer Filters
- Husqvarna Trimmer Gears
- Husqvarna Trimmer Handles
- Husqvarna Trimmer Hardware
- Husqvarna Trimmer Hoses and Tubes
- Husqvarna Trimmer Ignitions
- Husqvarna Trimmer Knobs
- Husqvarna Trimmer Latches
- Husqvarna Trimmer Manuals and Literatures
- Husqvarna Trimmer Pulleys
- Husqvarna Trimmer Seals and Gaskets
- Husqvarna Trimmer Spark Plugs
- Husqvarna Trimmer Springs and Shock Absorbers
- Husqvarna Trimmer Starters
- Husqvarna Trimmer Switches
- Husqvarna Trimmer Tanks and Containers
- Husqvarna Trimmer Transmissions and Clutches
- Husqvarna Trimmer Wheels and Rollers
- Husqvarna Trimmer Wire Plugs and Connectors