Haier Dishwasher Parts

Haier Appliance Parts
Shop By Appliance Type

Popular Haier Dishwasher Parts

Your Price
$6.24
  In Stock
LOWER RACK ROLLER
★★★★★
★★★★★
(10)
PartSelect Number PS16217024
Manufacturer Part Number WD12X26146
This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches in diameter and is charcoal in color. There are four rollers in total, please consider replacing your other rollers at the same time as they may be wearing at the same rate.
Installation Instructions
Dennis from CICERO, IN
Roller carrier got melted by heat coil
Replaced bad roller carrier with a new one. Read more...
Your Price
$23.31
  In Stock
Lower Spray Arm Asm
★★★★★
★★★★★
(12)
PartSelect Number PS12753866
Manufacturer Part Number WD22X26621
Fixes these symptoms
Installation Instructions
Kenneth from SEBRING, FL
All 3 spray arms were stoped up.
Replaced all 3 spray arms in less than 10 minutes.The top one came in two pieces,the mounting bracket and the arm.Snap the bracket on the dishwasher first , then attach the arm to the bracket. Read more...
Your Price
$18.76
  In Stock
BASKET ASM SILVERWARE
★★★★★
★★★★★
(53)
PartSelect Number PS12703061
Manufacturer Part Number WD28X24469
This basket is part of a silverware basket that has 3 sections. This is the middle section of the basket.
Fixes these symptoms
Installation Instructions
Carrie from Naples, FL
wheels were broken;basket was broken
This worked great. Cheap and easy. Read more...
Your Price
$6.24
  In Stock
BRACKET COUNTERTOP
★★★★★
★★★★★
(4)
PartSelect Number PS11700868
Manufacturer Part Number WD01X21740
This mounting bracket is manufactured to secure your dishwasher to your countertop. Mounting brackets should be installed so the dishwasher doesn’t tip forward. You can fit the bracket to either the cabinet or countertop. This part is about 3 inches long and is made of metal. This kit does not include the screws, please order screws separately if necessary.
Your Price
$6.24
  In Stock
END CAP
★★★★★
★★★★★
(19)
PartSelect Number PS7783360
Manufacturer Part Number WD12X10426
This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuously falls off the track or rail.
Installation Instructions
Wilson from MENIFEE, CA
upper and lower rack ASM showed sing of rust
Repair was simple, lower rack just remove and replaced with out any tools or disassemble required, for the upper rack installation, the end cap need to be removed out of the sliding tracks, slide old rack out and discard, clean the track with a suitable cloth and slide new rack in to the tracks, reinstall the old end caps, as a good preventing measure, order new end caps just in case they are need it if the old ones crack during removal.
save old rollers from old racks for future repairs
Read more...
Your Price
$30.36
  In Stock
Door Latch
★★★★★
★★★★★
(32)
PartSelect Number PS6447681
Manufacturer Part Number WD21X10490
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a broken or faulty door latch, your dishwasher door may not stay closed, and this can prevent the dishwasher from running. This item is sold individually, and if your door strike is also damaged, you will need to replace that part separately. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
Installation Instructions
James from ALBRIGHTSVLLE, PA
Door latch not functioning
1. Turn off breaker supplying power to dishwasher in electrical panel
2. Open dishwasher door
3. Unscrew the screws that secure the dishwasher to the counter.
4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch.
5. On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside.
6. Remove old door latch.
7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in.
8. Plug wire harness into new door latch.
9. Re-align dishwasher and re-secure to counter in previous position.
10. Test latch to make sure it closes properly.
11. Turn on breaker in electrical panel.
The dishwasher should now function properly.
Read more...
Your Price
$11.85
  In Stock
GASKET TUB Stainless Steel
★★★★★
★★★★★
(8)
PartSelect Number PS11721490
Manufacturer Part Number WD08X22095
Fixes these symptoms
Installation Instructions
Marty from TRAVERSE CITY, MI
Dishwasher leaking from the bottom of the door.
Process of elimination and a visit to my local repair store told me it was wise to try the tub gasket, and according to partselect.com, it solved the problem a majority of the time. My local repair dealer agreed: Try it. They agreed because for them to replace a lower door gasket AND the $10 tub gasket... if they came out, the service call and parts would equal half the cost to replace the whole dishwasher. So I bought a tub gasket from partselect.com and replaced the old one. It worked, it was easy, so if your same make & model is leaking? Try it first. That's my advice. Read more...
Your Price
$32.27
  In Stock
DETERGENT MODULE
★★★★★
★★★★★
(26)
PartSelect Number PS16542427
Manufacturer Part Number WD12X28238
The detergent dispenser in your dishwasher stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. This detergent dispenser is not sold with a sensor. It is gray in color and is sold individually. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
  • Door latch failure
  • Not cleaning dishes properly
  • Will not dispense detergent
  • See more...
Installation Instructions
Dennis from LAS VEGAS, NV
The detergent tray wouldn't open during wash cycle
1. Pull out dishwasher (not all the way) 2. Open the door. 3. Remove the white rope holding the door hinge (both sides) 4. Remove the door by pulling up when the door is open about 4-8 inches. 5. Lay the door on the floor ( put something under the door so not to scratch the front. 6. Remove the small bolt at the bottom of the door (both sides). 7. Slide the hinge back, up, then out. 8. Where the hinges were are another set of bolts, remove those (both sides) 9. Grab the top part of the door (the part with the buttons) and slide apart. 10. Remove the styrofoam carefully. 11. Disconnect the wiring harness. 12. Remove the 6 screws holding the Despenser tray in place. 13. Put in new Despenser tray and put everything back together. Read more...
Your Price
$6.24
  In Stock
Latch Striker
★★★★★
★★★★★
(3)
PartSelect Number PS8690622
Manufacturer Part Number WD13X10071
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of security in keeping the door closed. This part may become damaged if the door has been opened during a wash cycle. It can also wear out over time. It is fairly easy to replace, simply pop out the old door strike using a screwdriver for leverage, and insert the new one.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
Installation Instructions
Jeff from Downingtown, PA
Doesn't complete dry cycle, no clean light, random noises as if door was closing
Removed toe kick. Removed door counter weights and placed door on soft surface. Removed two bolts(I was able to leave hinges in place) slid door panel down and off. Removed plastic snap fit cover and 4 bolts from UI board. Two of the stand-offs where broken, glued them back into place. Ensured jumpers were set to my model, snapped cover back in place and remounted door. The dishwasher now runs through the cycle and clean light but did not dry. That turned out to be a bad flood switch. Read more...
Your Price
$6.24
  In Stock
Roller Cover
PartSelect Number PS16219735
Manufacturer Part Number WD28X27241
This part is the replacement carrier roller for your dishwasher. It is also known as the wheel support. It is made of gray plastic and is approximately 5 inches by 2 inches. The carrier roller supports the wheels on your upper dish rack so it can slide in and out of the dishwasher efficiently. This roller is for the right side of the dish rack, the left side is sold separately. Because it is made of plastic, the roller can occasionally crack and break, and when this occurs, it will need to be replaced. If you notice that your dish rack is having difficulty sliding in and out, you should check to see if the roller is damaged. This is an OEM part from the manufacturer and it is sold individually.
Installation Instructions
Teri from LAGUNA NIGUEL, CA
order #16343054 Complete service rack
this was ordered 4-9-21 and I have yet to receive it. Its difficult to explain the installation when you haven't received the main part. I paid for this but you have not shipped it. Very poor customer service. Read more...

Appliance Type

Popular Haier Dishwasher Models

Below are the most popular Haier Dishwasher models we have. Enter your model number in the search box to find your model.