General Electric Range Hood Fans and Blowers

Your Price

$28.42

General Electric Range Hood Fan Blade

★★★★★

15 Reviews

PartSelect Number PS952006

Manufacturer Part Number WB02X11025

This part is the replacement fan for your range hood. It is made of white plastic and is approximately 7 inches in diameter. The fan blade helps to dissipate smoke and smells from your range. The main reason you would want to repair the fan blade is if it is damaged, and will not rotate. To remove the fan, use a pair of pliers to grab the retaining clip, and pull the fan blade off the shaft of the motor. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Installation Instructions

Danny from DICKSON, TN

Exhaust fan broke

Pulled filter, pulled little clip that holds fan on to motor shaft. Placed new fan on (make sure turned right way, hard not to) put clip in place put filter back on. Done. Read more...

Your Price

$246.03

General Electric Range Hood Blower Assembly

PartSelect Number PS11762510

Manufacturer Part Number WB26X24861

Ensure the functionality of your GE range hood with this top-quality blower assembly. Specifically designed for removing cooking grease and odors from the air, this blower assembly enhances the cleanliness and freshness in your kitchen. This assembly may consist of multiple components, please refer to your parts diagram for a comprehensive list of all parts included. Prior to the installment of this unit, it is advised to disconnect the range hood or switch off the house circuit breaker for safety reasons. Also, wearing work gloves during the installation process would be prudent to protect your hands. Upgrade to this robust blower assembly from GE for a smooth and efficient operation of your range hood.

Installation Instructions

john from SUMMERVILLE, SC

blower had a squeak

I found the model number. Looked online for best price. PartSelect was the best. Ordered part, and it arrive within 5 days. When I installed the blower assembly it had a little vibration at high speed. I went to the PartSelect website and followed return process. I received an immediate refund and the I reordered the same part. The second blower assembly arrived within 5 days. There were tracking numbers available to follow the item online.

If I need another part I will use PartSelect.

JW Brabham Read more...

Your Price

$431.58

General Electric Range Hood Blower Asm

★★★★★

2 Reviews

PartSelect Number PS12709943

Manufacturer Part Number WB26X31760

This part helps draw the steam and odors through the vent when the fan switch is activated.

Your Price

$34.93

General Electric Range Hood Evaporator Fan Blade Kit

★★★★★

6 Reviews

PartSelect Number PS304684

Manufacturer Part Number WR60X114

This kit features a 5-blade plastic evaporator fan blade that rotates CCW and measures 4.5-inches in diameter and has a 3/8-inch-tall shaft. This kit also has a metal compression ring that secures the fan to the evaporator. The evaporator mechanism is normally located in the freezer and is responsible for pulling the warmer air over the condenser coils, cooling it off and then blowing and circulating that cooler air through the rest of the refrigerator. If the freezer compartment has a frost buildup or if there is a lack of cooling and airflow in your refrigerator, this fan likely needs to be replaced. To replace your evaporator fan, you will likely need a screwdriver and a set of pliers and check your user manual for the exact location of your evaporator fan.

Fixes these symptoms

Fridge too warm
Noisy
See more...

Installation Instructions

Keith from Fort Worth, TX

Noisey fan/motor (bad motor bearing ?)

Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able. Read more...

Your Price

$537.70

General Electric Range Hood Blower And Bracket Assembly

PartSelect Number PS12342224

Manufacturer Part Number WB26X28614

This blower and bracket assembly is a key ventilation component for select range hood models, designed to efficiently remove cooking fumes, grease particles, and odors from the kitchen environment. The assembly includes a high-performance blower motor and its mounting bracket, engineered for optimal airflow and secure installation. It helps maintain a clean and comfortable cooking space by drawing air through the hood and directing it out of the kitchen. Installation requires disconnecting power from the appliance—either by unplugging it or switching off the circuit breaker—and using appropriate safety gear such as work gloves. The unit is built to fit specific range hood configurations and supports reliable long-term operation.

Your Price

$330.54

General Electric Range Hood Blower Assembly

PartSelect Number PS12702968

Manufacturer Part Number WB26X31757

Your Price

$1100.73

General Electric Range Hood Blower Assembly

PartSelect Number PS11771848

Manufacturer Part Number WB26X27221

Improve kitchen air quality with this genuine blower assembly, designed for select GE range hoods. This OEM replacement efficiently removes smoke, grease, and odors by enhancing airflow through its integrated blower wheel and fan blade. Built for durability and optimal performance, it fits various GE, Hotpoint, and Café models, ensuring a precise fit and reliable operation. Ideal for resolving issues like reduced airflow or unusual noises, this assembly restores your range hood’s ability to keep your kitchen fresh. Installation is straightforward—disconnect power, remove the old unit, and secure the new assembly following manufacturer guidelines.