Dryer Pumps

Dryer Washing Machine Drain Pump

★★★★★

★★★★★

314 Reviews

The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after the spin cycle speed is maintained for a specific period of time. To make this installation you will need a Phillips screwdriver, a small flat-blade screwdriver, a pair of needle-nose pliers, and a pair of slip-joint pliers. Note that the pump casing is not included. This medium-difficulty repair may vary, but can generally be started by disconnecting power, then removing the top of the washer by taking out the four back screws and two small brackets. Then, remove the front panel by taking out the two screws and eight tabs that should be taken from the top. Moving down the front of the washer, remove the door, latch, tub gasket, and drain cover. Disconnect the drain hoses and clip from under the drain assembly, and install new assembly from there. Reassemble parts in direct reverse order -- taking photos during disassembly and keeping parts clearly organized can help here. Despite the number of steps, you will only need a standard Phillips screwdriver to complete this repair.

Dryer Drain Pump - 120v 60 Hz.

★★★★★

★★★★★

26 Reviews

This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, which includes a red flapper to prevent drain backflow. You will need to remove the front panel of your washer to access the drain pump. The tools you will need for the repair are a Phillips screw driver, a putty knife, a pair of slip joint pliers, and a 5/16 nut driver. Be sure to disconnect the water supply from your washer before doing the repair. The metal edges on the appliance are sharp, so use work gloves to safely complete the repair.

Dryer Pump Filter

★★★★★

★★★★★

10 Reviews

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

Dryer Drain Pump - 120v 60hz

★★★★★

★★★★★

1 Review

This durable drain pump is designed to efficiently remove water from the washer tub during drain and spin cycles, ensuring smooth operation and preventing water buildup. Made from high-quality ABS plastic for impact and corrosion resistance, it provides long-lasting reliability. Common signs that your pump may need replacement include slow or incomplete draining, water pooling around the machine, or error codes related to drainage. The pump is typically located at the bottom of the washer for easy access. Installation is simple—always disconnect power, remove the old pump, and secure the new one in place.

Dryer Pump This drain pump assembly is a vital component in Bosch dryers, designed to remove water from the condenser or steam generator area to support efficient drying performance. Engineered for durability and consistent operation, it helps maintain proper moisture control within the appliance. This genuine OEM part is compatible with select Bosch, Thermador, and Gaggenau models and serves as a direct replacement for malfunctioning or worn pumps. Installation should be performed with the appliance powered off, and compatibility should be verified using the model’s service documentation to ensure proper fit and function.

Dryer Heat Pump Assembly The dryer drain pump is an essential component that helps remove condensate water from the sump, ensuring efficient operation in heat pump dryers. Over time, the pump may wear out, become clogged, or stop functioning properly, leading to excess moisture buildup and reduced drying efficiency. This genuine OEM replacement part is designed for select dryer models, ensuring proper fit and reliable performance. A malfunctioning drain pump can result in water not draining properly, causing damp clothes or error codes on the control panel. To install, unplug the dryer and remove any obstructions before replacing the pump. Wearing protective gloves is recommended to prevent injury during installation.

Dryer Drain Pump Assembly This drain pump assembly removes wastewater during appliance operation, supporting proper drainage and preventing standing water. Designed for reliable performance, it helps maintain efficient operation. Replacing a failing pump can resolve drainage issues or abnormal noise.

Dryer Drain Pump This ice maker drain pump assembly is designed to efficiently remove excess water from the reservoir, ensuring proper drainage and preventing overflow within the appliance. Operating as a key component in maintaining optimal ice production, it helps protect against water pooling and potential damage caused by improper drainage. Constructed for durability and compatibility with select refrigerator and ice maker models, this genuine replacement part supports reliable performance and long-term use. Installation is straightforward, and replacing a faulty pump can resolve issues such as leaking, reduced ice output, or water accumulation. Verifying model compatibility is recommended prior to installation.

Dryer Pump This dryer drain pump is a genuine OEM component designed to efficiently remove moisture from the drum and channel it to the drain hose. By preventing water buildup and maintaining proper airflow, it supports consistent drying performance and helps avoid clogs or moisture-related issues. Built with durable materials and a high-powered motor, the pump is engineered for long-lasting reliability. Replacing a faulty pump can resolve symptoms such as poor drying results, water accumulation, or drainage problems. Installation should be performed with care, and compatibility should be verified before purchase to ensure proper fit and function.

Dryer Pump This genuine OEM drain pump is designed for use in both washing machines and ventless dryers. In washing machines, it removes water during the drain cycle, helping prevent water accumulation and ensuring efficient operation. In ventless dryers, it drains moisture collected by the condenser system, avoiding flooding or standing water inside the appliance. Common signs of pump failure include slow or incomplete drainage, unusual noises, or water remaining after a cycle. Built for durability and reliable performance, this pump supports proper moisture management across compatible systems. Installation should be performed with the power disconnected and may require basic tools. To ensure compatibility, verify your appliance’s model number before purchasing.