Dacor Refrigerator Brackets and Flanges
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Dacor Refrigerator Brackets and Flanges
Your Price
$19.42
In Stock
Dacor Refrigerator Control Bracket
PartSelect Number PS11739027
Manufacturer Part Number WP2180226
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dispenser section in place. Its measurements are roughly 9 inches long and 5 inches high, and this model comes in white. The tools you will need in order to do this repair include a Phillips screw driver, a quarter-inch nut-driver, and a pair of needle-nose pliers. If your ice dispenser is not working properly, your bracket could be the problem.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Not dispensing water
- See more...
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
Read more...
Your Price
$7.95
In Stock
Dacor Refrigerator Ice Maker Cover Bracket
PartSelect Number PS11739245
Manufacturer Part Number WP2198641
This is the replacement ice maker cover bracket for your refrigerator. It is made of white plastic and is approximately 5 inches wide and 2 inches long. The ice maker cover bracket holds and supports the ice maker cover. If the ice maker cover is loose or missing, you may need to replace the bracket. You will also want to replace the bracket if it will not stay in place, or if it is cracked or broken. To replace the cover bracket, simply remove the ice maker cover, then use a ¼ inch nut driver to loosen and remove the bracket. Screw in the new bracket and replace the cover to complete your repair. This is an OEM part that is sold individually.
Fixes these symptoms
- Ice maker not making ice
- See more...
Installation Instructions
brian from fresno, CA
broke tab on cover bracket
removed old bracket and replaced with new one - two screws and it was done - simple
Read more...
Your Price
$9.76
In Stock
Dacor Refrigerator Holder
PartSelect Number PS11739144
Manufacturer Part Number WP2188919
Fixes these symptoms
- Ice maker won’t dispense ice
- See more...
Installation Instructions
Paulette from SMYRNA, TN
Ice maker wouldn't work
Simply took out old part, paying attention to how it comes out. Simply put the seal in, followed by the shaft and then place holder on and screw down with the two screws that were with the old part. Abrakadabra! Ice maker working like new!
Read more...
Your Price
$51.87
In Stock
Your Price
$59.34
In Stock
Your Price
$49.37
Special Order
Your Price
$34.19
In Stock
Dacor Refrigerator BRACKET
Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place. Read more...
PartSelect Number PS2346744
Manufacturer Part Number 12906303WD
Installation Instructions
blane from upper arlington, OH
no symptoms (previousely damaged product)
Easy repair here, the Refridge was purchased at a discount as a scratch and dent model. the damage was superfical and the parts orderd were simple remove and replace job did not take long at all to replace all parts.Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place. Read more...
Your Price
$66.37
Special Order
Your Price
$91.35
In Stock
Your Price
$35.28
Special Order
Related Dacor Refrigerator Parts
- All Dacor Refrigerator parts
- Dacor Refrigerator Caps and Lids
- Dacor Refrigerator Circuit Boards and Touch Pads
- Dacor Refrigerator Dispensers
- Dacor Refrigerator Drawers and Glides
- Dacor Refrigerator Hardware
- Dacor Refrigerator Hinges
- Dacor Refrigerator Hoses and Tubes
- Dacor Refrigerator Ice Makers
- Dacor Refrigerator Lights and Bulbs
- Dacor Refrigerator Motors
- Dacor Refrigerator Seals and Gaskets
- Dacor Refrigerator Switches
- Dacor Refrigerator Thermostats
- Dacor Refrigerator Trays and Shelves
