Craftsman Pressure Washer Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Pressure Washer Hoses and Tubes
Your Price
$6.40
In Stock
Craftsman Pressure Washer Hose Quick Disconnect , Cm/bd/
PartSelect Number PS17060941
Manufacturer Part Number N828669
Your Price
$16.54
On Order
Craftsman Pressure Washer Line-fuel
PartSelect Number PS9140673
Manufacturer Part Number 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.
Your Price
$59.73
In Stock
Craftsman Pressure Washer Water Inlet Kit
PartSelect Number PS8911835
Manufacturer Part Number 201496GS
This water inlet kit delivers a controlled supply of water into the appliance, supporting proper operation during use. Designed for dependable flow and secure connections, it is commonly replaced when water supply issues or leaks occur.
Your Price
$35.15
In Stock
Craftsman Pressure Washer Chemical Injection Kit
PartSelect Number PS8911045
Manufacturer Part Number 192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers.
If the cleaning solution will not dispense, it is possible that you need a new Chemical Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair.
Customers rate this repair as Easy.
Installation Instructions
Carl from ARCADIA, FL
The copper fitting on the chemical injection broke.
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in backwards you pressure will fed directly into your chemical container!!
Read more...
Your Price
$10.60
In Stock
Craftsman Pressure Washer Hose-vacuum
PartSelect Number PS9306672
Manufacturer Part Number 791766
This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.
Your Price
$39.43
In Stock
Craftsman Pressure Washer Water Outlet Kit
PartSelect Number PS8911836
Manufacturer Part Number 201497GS
This is a genuine OEM sourced component which is specially designed for Craftsman pressure washers. It is an identical replacement for a missing or damaged outlet that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality part is made of durable metal and is sold individually.
Fixes these symptoms
- Leaks water
- See more...
Your Price
$16.40
In Stock
Craftsman Pressure Washer Nozzle, Soap
PartSelect Number PS8911521
Manufacturer Part Number 198841GS
This is an authentic replacement part manufactured for use with pressure washers. The nozzle is used to provide an even spray when using soap or a chemical cleaner. This black soap nozzle is available as an individual replacement part, please see model diagram for nozzle kits for a specific model pressure washers.
Your Price
$6.57
On Order
Craftsman Pressure Washer Garden Hose Filter
PartSelect Number PS9181874
Manufacturer Part Number B2384GS
This filter, also known as a water inlet screen, is designed for use with pressure washers and has a 1-inch diameter (including the surrounding rubber housing). The filter itself is made of mesh and is sold as an individual part that filters dirt and debris from entering your pressure washer. It is recommended that this part is routinely inspected to keep your equipment running smoothly and to prevent a damaged filter from allowing dirt into your equipment. This part sits in-between the hose from your home and the pressure washer itself and is a genuine OEM part that requires no tools to replace or install.
Your Price
$58.30
In Stock
Craftsman Pressure Washer Kit, Outlet Anodized
PartSelect Number PS9268969
Manufacturer Part Number 190589GS
This is an original part from Briggs and Stratton, Troy-Bilt, and Snapper for use with Pressure Washers. The outlet tube kit includes the O-ring. The pressure hose connects to the outlet tube, which threads onto the pump. The tool that you will need to replace the outlet tube kit is a Wrench Set.
Your Price
$15.17
In Stock
Craftsman Pressure Washer Tube-breather
PartSelect Number PS9294751
Manufacturer Part Number 691923
This is an original Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The breather tube connector 691923 connects the breather tube to the carburetor. The most common reason for replacing the breather tube is when it is misplaced or broken. This part is sold individually. The tools that you will need to replace the breather tube are a Phillips-head screwdriver, 5/16th-inch socket or nut driver. Wait until the engine is cool before installing this part. Work in a well-ventilated area.
Related Craftsman Pressure Washer Parts
- Craftsman Pressure Washer Bearings
- Craftsman Pressure Washer Brackets and Flanges
- Craftsman Pressure Washer Caps and Lids
- Craftsman Pressure Washer Carburetors
- Craftsman Pressure Washer Engines
- Craftsman Pressure Washer Filters
- Craftsman Pressure Washer Handles
- Craftsman Pressure Washer Hardware
- Craftsman Pressure Washer Knobs
- Craftsman Pressure Washer Manuals and Literatures
- Craftsman Pressure Washer Pumps
- Craftsman Pressure Washer Seals and Gaskets
- Craftsman Pressure Washer Springs and Shock Absorbers
- Craftsman Pressure Washer Starters
- Craftsman Pressure Washer Tanks and Containers
- Craftsman Pressure Washer Valves
- Craftsman Pressure Washer Wheels and Rollers
- Craftsman Pressure Washer Wire Plugs and Connectors