Craftsman Paint Sprayer Valves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Paint Sprayer Valves
Your Price
$7.31
Special Order
Craftsman Paint Sprayer Drain Valve
PartSelect Number PS12508562
Manufacturer Part Number N286039
Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank.
This part will need to be replaced when it is no longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair.
Customers rate this repair as Easy.
Fixes these symptoms
- Air leak
- See more...
Your Price
$20.76
Special Order
Craftsman Paint Sprayer Flapper Valv
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED. Read more...
PartSelect Number PS10053848
Manufacturer Part Number VS001800AV
This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air filter while the unit is running, damaged/sticking valves is a common issue when you have low compression, and can also cause the motor/engine to stall and too much pressure in the pump's crankcase. This part is sold individually. Here is a list of tools that are needed to install the flapper valve are a screwdriver, socket wrench, and a wrench.
Installation Instructions
EDWARD from PHILADELPHIA, PA
KNOCKING SOUND AND LOCK UP
TURN OFF POWER TO UNITREMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED. Read more...
Your Price
$35.72
In Stock
Craftsman Paint Sprayer Asme Safety Valve
PartSelect Number PS10053434
Manufacturer Part Number V-215100AV
This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are often necessary for the removal and replacement. Please refer to the specific manual for additional repair information.
Your Price
$31.20
Special Order
Your Price
$67.62
In Stock
Craftsman Paint Sprayer Flapper Valve .015 Thick
PartSelect Number PS10053850
Manufacturer Part Number VS001801AV
This replacement flapper valve is a high quality item that is sourced from original equipment manufacturer for use with Campbell Hausfeld air compressors. This part is secured under the cylinder head helping to control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase beneath the piston. This part is made from durable metal and it is sold individually.