Black and Decker Trimmer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Black and Decker Trimmer Parts
Your Price
$6.40
In Stock
Black and Decker Trimmer Cover Spool
PartSelect Number PS18981315
Manufacturer Part Number 385022-03N
This cover is designed for use with trimmers and edgers and is a genuine OEM part. Made of plastic, this cover is used to hold and secure the spool or line within the trimmer cutter head assembly. If the cover for your trimmer is broken or damaged and cannot contain the spool or line, the cover needs to be replaced immediately. To replace the cover, push in the upper slots on the cover, which will disconnect and release it from the rest of the assembly.
Your Price
$23.82
In Stock
Black and Decker Trimmer Sa Gear And Spindle, Serv Only
Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
PartSelect Number PS18994000
Manufacturer Part Number N498091
This is a Genuine OEM Sourced replacement part designed for Black and Decker String Trimmer. This item is used to secure and drive the Spool. It is made out of Plastic and Metal. Includes a Plastic Housing, Plastic Gear, Metal Bearing and Two (2) Metal Eyelets.
Fixes these symptoms
- Cutting line does not come out
- Engine revs but trimmer head will not turn
- See more...
Installation Instructions
Mark from CATOOSA, OK
Bearings on motor armature were shot ... driver gear not turning driven gear.
Took off line guard and guide. Remove 1 Phillips screw.Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
Your Price
$6.40
In Stock
Black and Decker Trimmer Sa Lever, Single Line, 12
PartSelect Number PS18988538
Manufacturer Part Number 90567077
This is a genuine Black and Decker replacement part, it is sold individually. The purpose of the 90567077 Lever Assembly, is to regulate the amount of line that is fed from the auto-feed spool. This part has a tendency to wear out often. It is advised to have an extra one on hand.
Fixes these symptoms
- Cutting line does not come out
- See more...
Your Price
$8.96
In Stock
Black and Decker Trimmer Sa Cap, Euro
PartSelect Number PS18988789
Manufacturer Part Number 90583594N
This is a genuine Black and Decker replacement part. Sold individually. This part secures the spool into the spool housing. It is released by pressing the two tabs on either side, and is reattached by lining up the tabs and pressing in. Part is made of plastic. It is commonly used in trimmers, see list below for compatibility.
Fixes these symptoms
- Cutting line does not come out
- See more...
Your Price
$6.40
In Stock
Black and Decker Trimmer Spring, Spool Cover
PartSelect Number PS18988535
Manufacturer Part Number 90566944
Genuine Black and Decker replacement part, this item is sold individually. The purpose of the 90566944 Spring is to hold the spool in place on the Trimmer shown below. It is placed between the spool and the spool cover. The cover snaps into the spool housing by means of the two tabs on both sides of the cover.
Your Price
$16.07
In Stock
Black and Decker Trimmer Spool Assembly
PartSelect Number PS17016195
Manufacturer Part Number AF-100
Keep your trimming jobs quick and hassle-free with this genuine Black & Decker replacement spool. Designed for use with select string trimmer models, this part includes both the spool and pre-wound .065 gauge cutting line, making it easy to swap out and get back to work.
This component houses the cutting line that trims grass and weeds, and it's sold individually. Replacing it is simple—just remove the spool cover, place the new spool inside the housing, feed a bit of line through the opening, and snap the spool cap back into place. No tools are required, and installation takes just minutes.
Your Price
$6.40
In Stock
Black and Decker Trimmer Sa Lever, Single Line, 14
PartSelect Number PS18988539
Manufacturer Part Number 90567079
This is a genuine Black and Decker replacement part, it is sold individually. The purpose of the 90567079 Lever, is to regulate the amount of line that is fed from the auto-feed spool. This part has a tendency to wear out often. It is advised to have an extra one on hand.
Your Price
$16.33
In Stock
Black and Decker Trimmer Bump Cap
PartSelect Number PS10184171
Manufacturer Part Number 682378-02
This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman hedge trimmers. The cap holds in the spool and bumper to the spool housing. This part is made of durable plastic and is sold individually. There are no tools required for installation, simply push the two tabs on the side of the cap and snap it into the housing. It is the same process to remove the old one.
Your Price
$12.47
In Stock
Black and Decker Trimmer Carbon Brush With Holder
PartSelect Number PS10165739
Manufacturer Part Number 132254-07
Genuine Dewalt replacement part, this item is sold individually. It is used on all the tools shown below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$19.38
In Stock
Black and Decker Trimmer Spool Kit
PartSelect Number PS18988231
Manufacturer Part Number 90540850
This is a genuine Black and Decker replacement part, it is sold individually. It includes the Outer Housing with two Eyelets and Cap and Lever. This Converts The Type 1 To The Type 2 Head) The Type 1 Outer Spool Is No Longer Available.
Black and Decker Trimmer Appliance Types
Related Black and Decker Trimmer Parts
- Black and Decker Trimmer Bearings
- Black and Decker Trimmer Belts
- Black and Decker Trimmer Blades
- Black and Decker Trimmer Brushes
- Black and Decker Trimmer Caps and Lids
- Black and Decker Trimmer Fans and Blowers
- Black and Decker Trimmer Gears
- Black and Decker Trimmer Knobs
- Black and Decker Trimmer Power Cords
- Black and Decker Trimmer Springs and Shock Absorbers
- Black and Decker Trimmer Switches
- Black and Decker Trimmer Wire Plugs and Connectors
Popular Black and Decker Trimmer Models
Below are the most popular Black and Decker Trimmer models we have. Enter your model number in the search box to find your model.
- LST140C 40v Lith String Trim
- LST136 Cordless String Trimmer
- LST136 36V String Trimmer
- LST136 Cordless String Trimmer
- 8220 Lawn Trimmer
- 8220 Lawn Trimmer
- 8220 Lawn Trimmer
- 8220 Lawn Trimmer
- 8220 Lawn Trimmer
- 8220 Lawn Trimmer
- GH1000 14" Grass Hog XP Trimmer/Edger
- GH1000 14" Grass Hog XP Trimmer/Edger
- GH1000 14" String Trimmer
- ST4500 12V String Trimmer
- ST4500 12" Trimmer /Edger
- ST4500 12V String Trimmer
- ST4500 12 String Trimmer
- ST4500 Trimmer Edger
- ST4500 12V String Trimmer
- GH900 6.5 Amp String Trimmer Power Tool