Black and Decker Chop Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Black and Decker Chop Saw Parts
Your Price
$39.76
In Stock
Black and Decker Chop Saw Power Cord
PartSelect Number PS10169913
Manufacturer Part Number 330079-98
It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
• 2 Prongs
• 2 Wires
• 14 Gauge
• 10 Feet Long
Your Price
$35.04
In Stock
Black and Decker Chop Saw Ball Bearing
PartSelect Number PS10166095
Manufacturer Part Number 146555-01
Genuine Manufacturer Sourced replacement part used on a variety of equipment. This part is made out of Metal and is Sold Individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 395843-00
Your Price
$6.40
In Stock
Black and Decker Chop Saw Brush Holder
PartSelect Number PS10182308
Manufacturer Part Number 622440-00
This is a genuine OEM approved replacement part designed for use with chop saws. This item holds carbon brush against the armature. It is made out of plastic with metal and it is sold individually. Please note carbon brushes are sold separately. To replace this assembly you would need a screwdriver and pliers. • First remove screws holding the cover together • Carefully remove two halves of the housing to gain access to armature and brush holder • Remove the screws holding brush holder to the trigger • Remove the armature assembly and the brush holder • Install the new brush holder, brushes and the armature • Reassemble and test your tool
Your Price
$6.40
In Stock
Black and Decker Chop Saw Retaining Ring
PartSelect Number PS10166028
Manufacturer Part Number 144803-00
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
Your Price
$15.05
On Order
Black and Decker Chop Saw Handle Spade
PartSelect Number PS10182689
Manufacturer Part Number 628037-00
This is an original replacement part manufactured for use with drills. This hardened plastic spade handle is secured at the back of the drill using a knob, which is available separately. The spade handle provides an additional grip option for heavy duty drills, please note the spade handle is sold individually.
Your Price
$6.40
In Stock
Black and Decker Chop Saw Brush Cap
PartSelect Number PS10182309
Manufacturer Part Number 622441-00
This is a genuine OEM replacement part used on chop saws. The purpose of the brush cap is to hold the brush in the brush holder. This cap has external threads that thread into the housing of the tool. Be careful when removing and replacing these, they have a tendency to break. This item is made out of plastic and it is sold individually.
Your Price
$9.95
In Stock
Black and Decker Chop Saw Cord Guard
PartSelect Number PS10169656
Manufacturer Part Number 330005-02
This cord guard is a genuine DeWalt replacement part and is sold individually. • Cord guards, also called cord protectors, are designed to slide onto and fit securely at the end of your cord, where its firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard. • This cord guard will fit cords for the tools listed under the "Compatible Tools" listing. It is not guaranteed to fit any other cords.
Your Price
$11.70
In Stock
Black and Decker Chop Saw Carbon Brush
PartSelect Number PS10170575
Manufacturer Part Number 384613-01
This is a genuine Black & Decker/Dewalt replacement part, it is sold individually.2 of these Brushes are required in the tools listed below.It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$57.44
In Stock
Black and Decker Chop Saw Switch
PartSelect Number PS10182604
Manufacturer Part Number 626214-00
This high quality switch is an authentic OEM supplied item, it is not an aftermarket imitation. It is specially designed for Black and Decker and Dewalt chop saws. This switch allows user to turn the tool on and off. Mechanical switches over time tend to wear our and begin to fail eventually requiring replacement. Please note, one plastic switch is included per order. To replace this switch you will need a screwdriver.
Your Price
$6.40
In Stock
Black and Decker Chop Saw Foot
PartSelect Number PS10170447
Manufacturer Part Number 383243-00
This rubber foot is an OEM replacement part made for the chop saws listed below. It fits on a corner of the chop saw base, dampening vibrations and stabilizing saw while protecting surfaces beneath. This listing is for one (1) foot. Note that four (4) feet are included with the Base set, part # 391963-00.
Black and Decker Chop Saw Appliance Types
Popular Black and Decker Chop Saw Models
Below are the most popular Black and Decker Chop Saw models we have. Enter your model number in the search box to find your model.
- 3912 12 Cut Off Machine
- 3912 12 Cut Off Machine
- 3912 12 Cut Off Machine
- 3912 12 Cut Off Machine
- 3912 12 Cut Off Machine
- 3912 12 Cut Off Machine
- 2730 14 Chop Saw
- 2730 14 Chop Saw
- 2730 14 Chop Saw
- GR871 14 Chop Saw
- 3934 14 Chop Saw
- 3934 14 Chop Saw
- 3934 14 Chop Saw
- 3935 14" Chop Saw
- 3935 14" Chop Saw
- 3105K Dual Range Cut Saw
- 3105K Dual Range Cut Saw
- 2731 14 Chop Saw
- CS2000-B2C Chop Saw
- 7749 Radial Arm Saw