EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

Black and Decker Hand Vacuum Parts

Popular Black and Decker Hand Vacuum Parts

Your Price
$7.17
   In Stock
Black and Decker Hand Vacuum Filter Gen9.5 22 Pleats New
PartSelect Number PS18994675
Manufacturer Part Number N600601
Works with Black & Decker hand held vacuums.
Your Price
$6.40
   In Stock
Black and Decker Hand Vacuum Sa Filter Bag, Opp&mpp, Gen9
PartSelect Number PS18988358
Manufacturer Part Number 90558113-01
This filter is an authentic manufacturer replacement part for blower vacuums. It has a wide plastic rim and a fine mesh screen that allows air to pass through while acting as a protective barrier to prevent dirt and debris from entering and damaging the motor. The filter can fail if it becomes clogged, torn, or extremely dirty. A faulty filter can lead to motor damage, reduced suction power, and difficulties starting the equipment. It is recommended to regularly inspect and replace the filter to keep your equipment in good working condition. Locate the filter housing/compartment by the intake area of the equipment. Detach the filter cover and pull the old filter out. Clean the filter housing and place the new filter inside. Replace the cover and switch the equipment on to check that it is functioning properly.
Your Price
$17.88
   In Stock
Black and Decker Hand Vacuum Charger
★★★★★
★★★★★
1 Review
PartSelect Number PS18989413
Manufacturer Part Number 90627870
This is a wall charger made for various models of handheld vacuum and cleaners and is sold as an individual charger. This is an OEM charger that connects to a specific port on your equipment and when connected to the wall outlet will charge at 15V/150mA. If you notice your current charger gets excessively hot, interrupts or completely stops charging your equipment, or is in any way damaged or frayed, you will need to replace it.
Your Price
$7.53
   In Stock
Black and Decker Hand Vacuum Filter Bag
PartSelect Number PS18988357
Manufacturer Part Number 90558113
This is a genuine Black and Decker replacement part, it is sold individually. The 90558113 filter bag is situated behind the 90558115 pre-filter to make sure dirt and debris do not get into the motor and damage it. It can be cleaned by blowing air through it. It is advisable to replace it when this is done a couple of times.
Your Price
$6.40
   In Stock
Black and Decker Hand Vacuum Pre-filter
PartSelect Number PS18989567
Manufacturer Part Number 90640311
This genuine OEM pre-filter in your vacuum is the first line of defense against larger debris and particles, preventing them from clogging the main filter and improving overall filtration efficiency. Positioned inside the dust bowl, you will know it is time for a replacement when the pre-filter appears visibly dirty or clogged, leading to reduced suction power and airflow. To remove the pre-filter, simply press the dust bowl release button on the handle, detach the dust bowl, and take out the filter from within. When installing the new pre-filter, securely attach it to the filter before placing it back into the dust bowl. It is advisable to replace the filter every 6 to 9 months, depending on usage frequency. Keep in mind that the pre-filter and filter are sold separately.
Your Price
$9.11
   In Stock
Black and Decker Hand Vacuum Sa Filter
PartSelect Number PS18994473
Manufacturer Part Number N566707
This is a genuine Black and Decker replacement part, it is sold individually. The 90552433-01 works in conjunction with the 90552388 Prefiter. It will collect the dust and debris that the Prefilter was not able to gather. Its purpose is to catch the dust and small debris from entering the motor and damaging it. Once this filter becomes dirty and clogged it should be discarded, and replaced with a new one.
Your Price
$6.40
   In Stock
Black and Decker Hand Vacuum Filter Sa
PartSelect Number PS18995294
Manufacturer Part Number N820985
This is a Genuine OEM Approved replacement part designed for use with Black and Decker Hand Vac. This Filter helps to keep the air clean. This part is made out of Plastic and it is Sold Individually. No tools are required to replace this Filter. You can simply remove the old filter from the unit and replace it with the new one.
Your Price
$6.40
   In Stock
Black and Decker Hand Vacuum Filter Assembly, Overmold
PartSelect Number PS18989031
Manufacturer Part Number 90598100
Your Price
$9.78
   In Stock
Black and Decker Hand Vacuum Filter Assembly
PartSelect Number PS10179257
Manufacturer Part Number 5147239-00
This is a genuine Black and Decker replacement part, it is sold individually. The 5147239-00 works in conjunction with the 5147238-00 Prefiter. It will collect the dust and debris that the Prefilter was not able to gather. It will catch the dust and small debris from entering the motor and damaging it. Once this filter becomes dirty and clogged it should be discarded, and replaced with a new one.
Your Price
$8.50
   In Stock
Black and Decker Hand Vacuum Sa Bowl W/o Pad Print Es233 Na
PartSelect Number PS18994317
Manufacturer Part Number N541616
This replacement bowl assembly is specially manufactured for Black and Decker and hand vacuums. It is an authentic OEM part, not an aftermarket equivalent. This is the main container that collects the dust and other debris. This container is made out of plastic and it is sold individually. Please note, filters not included in this assembly, they are sold separately.

Black and Decker Hand Vacuum Appliance Types

Related Black and Decker Hand Vacuum Parts

Popular Black and Decker Hand Vacuum Models

Below are the most popular Black and Decker Hand Vacuum models we have. Enter your model number in the search box to find your model.